Optimization of spherical cartridge blasting mode in one-step raise excavation using pre-split blasting

摘要

In one-step raise excavation, spherical cartridge blasting mode is easy to be implemented due to minimal requirement of the hole-deviation. Nevertheless, it may induce cumulative damage to the country rock. This study firstly uses a validated rock model (Johnson-Holmquist model) to simulate the damage evolution process of a raise by spherical cartridge blasting mode in LS-DYNA software. Then a field test is carried out to examine the numerical results of spherical cartridge blasting mode. Both the numerical and test results indicate that because of highly confined rock mass and restricted free face in deep raise, a large charge is required in spherical cartridge blasting mode which leads to extensive damage on the wall of the raise. In order to solve such a problem, the pre-split blasting technique is developed to optimize spherical cartridge blasting mode. According to the subsequent numerical results, the improved spherical cartridge blasting mode is successfully applied in another filling raise. This study provides an effective solution to the difficulties that are encountered in one-step raise excavation by spherical cartridge blasting mode.