...
首页> 外文期刊>Injury >Iliosacral screw insertion using CT-3D-fluoroscopy matching navigation
【24h】

Iliosacral screw insertion using CT-3D-fluoroscopy matching navigation

机译:使用CT-3D荧光透视匹配导航Iliosacral螺丝插入

获取原文
获取原文并翻译 | 示例
           

摘要

Background Percutaneous iliosacral screw insertion requires substantial experience and detailed anatomical knowledge to find the proper entry point and trajectory even with the use of a navigation system. Our hypothesis was that three-dimensional (3D) fluoroscopic navigation combined with a preoperative computed tomography (CT)-based plan could enable surgeons to perform safe and reliable iliosacral screw insertion. The purpose of the current study is two-fold: (1) to demonstrate the navigation accuracy for sacral fractures and sacroiliac dislocations on widely displaced cadaveric pelves; and (2) to report the technical and clinical aspects of percutaneous iliosacral screw insertion using the CT-3D-fluoroscopy matching navigation system. Methods We simulated three types of posterior pelvic ring disruptions with vertical displacements of 0, 1, 2 and 3 cm using cadaveric pelvic rings. A total of six fiducial markers were fixed to the anterior surface of the sacrum. Target registration error over the sacrum was assessed with the fluoroscopic imaging centre on the second sacral vertebral body. Six patients with pelvic ring fractures underwent percutaneous iliosacral screw placement using the CT-3D-fluoroscopy matching navigation. Three pelvic ring fractures were classified as type B2 and three were classified as type C1 according to the AO-OTA classification. Iliosacral screws for the S1 and S2 vertebra were inserted. Results The mean target registration error over the sacrum was 1.2 mm (0.5-1.9 mm) in the experimental study. Fracture type and amount of vertical displacement did not affect the target registration error. All 12 screws were positioned correctly in the clinical series. There were no postoperative complications including nerve palsy. The mean deviation between the planned and the inserted screw position was 2.5 mm at the screw entry point, 1.8 mm at the area around the nerve root tunnels and 2.2 mm at the tip of the screw. Conclusion The CT-3D-fluoroscopy matching navigation system was accurate and robust regardless of pelvic ring fracture type and fragment displacement. Percutaneous iliosacral screw insertion with the navigation system is clinically feasible.
机译:背景技术即使使用导航系统,经皮髂骨螺钉插入需要大量的经验和详细的解剖知识,以找到适当的入口点和轨迹。我们的假设是三维(3D)荧光透视导航与术前计算断层扫描(CT)的比例相结合,可以使外科医生能够执行安全可靠的ILIOSACRAL螺钉插入。目前研究的目的是两倍:(1)以证明骶骨骨折和广泛流离失所的尸体骨盆上的骶骨裂缝和骶髂脱臼的导航准确性; (2)报告使用CT-3D荧光透视匹配导航系统报告经皮髂骨螺钉插入的技术和临床方面。方法采用尸体骨盆环模拟垂直位移的三种类型的后骨盆圈破坏。总共六个基准标记固定在骶骨的前表面上。在第二骶椎体上的荧光影像成像中心评估骶骨上的目标登记误差。六位骨盆骨折患者使用CT-3D荧光透视匹配导航进行经皮髂骨螺杆螺钉。根据AO-OTA分类,将三种盆腔骨折分类为B2型,三种被分类为C1型。插入S1和S2椎骨的ILIOSACRAL螺钉。结果实验研究中,骶骨上的平均目标登记误差为1.2mm(0.5-1.9mm)。骨折类型和垂直位移量不会影响目标登记误差。所有12个螺钉在临床系列中正确定位。没有术后并发症,包括神经麻痹。螺杆入口点的螺杆入口点的平均偏差为2.5毫米,在神经根隧道周围的区域处为1.8毫米,螺钉的尖端处为2.2毫米。结论无论盆腔骨折型和碎片位移如何,CT-3D荧光透视匹配导航系统都是准确的且鲁棒。经皮螺杆插入导航系统是临床上可行的。

著录项

  • 来源
    《Injury》 |2014年第6期|共7页
  • 作者单位

    Department of Orthopaedic Surgery Osaka University Graduate School of Medicine 2-2 Yamadaoka;

    Department of Orthopaedic Medical Engineering Osaka University Graduate School of Medicine 2-2;

    Department of Orthopaedic Surgery Osaka University Graduate School of Medicine 2-2 Yamadaoka;

    Department of Orthopaedic Surgery Osaka University Graduate School of Medicine 2-2 Yamadaoka;

    Department of Orthopaedic Medical Engineering Osaka University Graduate School of Medicine 2-2;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 创伤外科学;
  • 关键词

    3D fluoroscopy; CT-based plan; Iliosacral screw; Navigation;

    机译:3D透视;基于CT的计划;iLiosacral螺丝;导航;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号