首页> 外文期刊>Atmospheric chemistry and physics >PathfinderTURB: an automatic boundary layer algorithm. Development, validation and application to study the impact on in situ measurements at the Jungfraujoch
【24h】

PathfinderTURB: an automatic boundary layer algorithm. Development, validation and application to study the impact on in situ measurements at the Jungfraujoch

机译:pathuinderturb:自动边界层算法。 在Jungfraujoch对原地测量的影响研究,验证和应用

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

We present the development of the PathfinderTURB algorithm for the analysis of ceilometer backscatter data and the real-time detection of the vertical structure of the planetary boundary layer. Two aerosol layer heights are retrieved by PathfinderTURB: the convective boundary layer (CBL) and the continuous aerosol layer (CAL). PathfinderTURB combines the strengths of gradient-and variance-based methods and addresses the layer attribution problem by adopting a geodesic approach. The algorithm has been applied to 1 year of data measured by two ceilometers of type CHM15k, one operated at the Aerological Observatory of Payerne (491ma.s.l.) on the Swiss plateau and one at the Kleine Scheidegg (2061ma.s.l.) in the Swiss Alps. The retrieval of the CBL has been validated at Payerne using two reference methods: (1) manual detections of the CBL height performed by human experts using the ceilometer backscatter data; (2) values of CBL heights calculated using the Richardson's method from co-located radio sounding data. We found average biases as small as 27m (53 m) with respect to reference method 1 (method 2). Based on the excellent agreement between the two reference methods, PathfinderTURB has been applied to the ceilometer data at the mountainous site of the Kleine Scheidegg for the period September 2014 to November 2015. At this site, the CHM15k is operated in a tilted configuration at 71 degrees zenith angle to probe the atmosphere next to the Sphinx Observatory (3580ma.s.l.) on the Jungfraujoch (JFJ). The analysis of the retrieved layers led to the following results: the CAL reaches the JFJ 41% of the time in summer and 21% of the time in winter for a total of 97 days during the two seasons. The season-averaged daily cycles show that the CBL height reaches the JFJ only during short periods (4% of the time), but on 20 individual days in summer and never during winter. During summer in particular, the CBL and the CAL modify the air sampled in situ at JFJ, resulting in an unequivocal dependence of the measured absorption coefficient on the height of both layers. This highlights the relevance of retrieving the height of CAL and CBL automatically at the JFJ.
机译:我们介绍了用于分析Ceirometer反向散射数据的PathSuinderk算法和行星边界层垂直结构的实时检测。通过PathSuinderturb检索两个气溶胶层高度:对流边界层(CBL)和连续气溶胶层(CAL)。 PathSuindertburb通过采用测地方法来结合基于梯度和方差的方法的强度,并通过采用测地方法来解决层归因问题。该算法已应用于由CHM15K型CHM15K的两个CEILOMERS测量的1年数据,一个在Payerne(491ma.sl)的避风气天文台在瑞士高原和瑞士阿尔卑斯山的Kleine Scheidegg(2061ma.sl)中运行。 。 CBL的检索已经使用两种参考方法在Payerne验证:(1)使用CeiLometer反向散射数据的人类专家执行的CBL高度的手动检测; (2)使用Richardson方法从共同定位的无线电探测数据计算CBL高度的值。我们发现相对于参考方法1的平均偏差为27m(53米)(方法2)。根据两种参考方法之间的优秀协议,Pathuindertburb已经应用于2014年9月至2015年11月的Kleine ScheideGG的山区网站上的Ceilometer数据。在本网站,CHM15K在71处以倾斜的配置运行Zenith角度探测Jungfraujoch(JFJ)旁边的狮身人面像天文台(3580ma.sl)旁边的大气。检索到的层的分析导致了以下结果:CAL在夏季的41%的时间达到了JFJ,冬季共有21%的时间,共有97天。季节平均每日循环表明,CBL高度只在短时间内达到了JFJ(其中4%),但在夏季的20个时代,冬季从未发生过。特别地,在夏季,CBL和CAL在JFJ下修改原位采样的空气,导致测量的吸收系数在两层高度上的明确依赖性。这突出显示在JFJ上自动检索CAL和CBL的高度的相关性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号