A state boundary surface model for improving the dilatancy simulation of granular material in reinforced anchors

摘要

It is acknowledged that for extending the experimental results to real scale design, it is necessary to use an appropriate numerical analysis. The good analysis in geotechnical problems needs to adopt a suitable constitutive model for the materials. This paper presents a modeling approach to investigate the complex behavior of granular trench and reinforcement system. For this purpose, an experimental and numerical investigation has been carried out on the behavior of pullout resistance of an embedded anchor (circular plate) with and without geogrid reinforcement layers in stabilized loose and dense sand using a granular trench. Different parameters have been considered, such as number of geogrid layers, embedment ratios, relative density of soil, and height ratios of granular trench. Finite element analysis with Hardening Soil Model was utilized for sand and CANAsand constitutive model was used for granular trench to investigate failure mechanism and the associated rupture surfaces. Results showed that, when soil was improved with the granular-geogrid trench, the uplift force significantly increased, but in geogrid-reinforced granular trench condition, the ultimate pullout resistance at failure increased as the number of geogrid layers increased up to the third layer, the fifth layer had a negligible effect in comparison with the third layer of reinforcement. The ultimate uplift capacity of anchor plate and the variation of surface deformation for all the tests indicated a close agreement between the experimental and numerical models.