首页> 外文期刊>Arabian journal of chemistry >Sorption studies of heavy metal ions by salicylic acid-formaldehyde-catechol terpolymeric resin: Isotherm, kinetic and thermodynamics
【24h】

Sorption studies of heavy metal ions by salicylic acid-formaldehyde-catechol terpolymeric resin: Isotherm, kinetic and thermodynamics

机译:水杨酸 - 甲醛 - 儿茶酚萜醇萜烯树脂树脂树脂的吸附研究:等温,动力学和热力学

获取原文
获取原文并翻译 | 示例
           

摘要

Terpolymeric resin has been synthesized by condensing salicylic acid with catechol employing formaldehyde as a cross linking agent at 80 ± 5 °C using DMF as a solvent. The resin was characterized by elemental analysis, FTIR, XRD and thermal analysis (TGA, DTA and DTG). The morphology of the resin was studied by optical photographs and scanning electron micrographs (SEM) at different magnifications. The physico-chemical properties have been studied. The uptake behavior of various metal ions viz. Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) towards synthesized resin has been studied depending on contact time, pH and temperature. The selectivity order found is: Cu(II) >Zn(II) >Pb(II) >Ni(II) >Cd(II). The sorption data obtained at optimized conditions were analyzed by six two parameter isotherm models like Langmuir, Freundlich, Temkin, Dubi-nin-Radushkevich (D-R), Halsey and Harkins-Jura. The Langmuir, Freundlich and Dubinin-Rad-ushkevich (D-R) isotherms were found better to describe the sorption data with high correlation for the adsorption with a low SSE value for all the metals under study. The adsorption capacities of the SFC resin for removal of Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were determined with the Langmuir equation and found to be 0.815, 1.104, 1.215, 0.498, and 0.931 mmol/g respectively. The adsorption process follows first order kinetics and specific rate constant K_r was obtained by the application of Lag-ergren equation. Thermodynamic parameters viz. ΔG~(ads), ΔS~(ads) and ΔH~(ads) have also been calculated for the metal-resin systems. The external diffusion rate constant (K_s) and intra-particle diffusion rate constant (K_(id)) were calculated by Spahn-Schlunder and Weber—Morris models respectively. Desorp-tion studies were done using various desorbing agents viz. de-ionized water, boiled water, various concentrations of HC1, ammonia, thiourea, citric acid and tartaric acid.
机译:通过使用DMF作为溶剂,通过将水杨酸用CateCholy作为交联剂的儿茶酚缩合水杨酸,通过将甲醛作为交叉连接剂的儿茶酚作为交叉连接剂合成。该树脂的特征在于元素分析,FTIR,XRD和热分析(TGA,DTA和DTG)。通过光学照片和扫描电子显微照片(SEM)在不同放大率下研究树脂的形态。已经研究了物理化学性质。各种金属离子的摄取行为。已经研究了Ni(II),Cu(II),Zn(II),CD(II)和Pb(II),取决于接触时间,pH和温度。发现的选择性顺序是:Cu(II)> Zn(II)> Pb(II)> Ni(II)> Cd(II)。在优化条件下获得的吸附数据被Langmuir,Freundlich,Temkin,Dubi-Nin-Radushkevich(D-R),Halsey和Harkins-jura等六个两个参数等温线模型分析了六个参数等温线。发现Langmuir,Freundlich和Dubinin-rad-Ushkevich(D-R)等温线尤为努力描述具有高相关的吸附数据,对于所有研究的所有金属的SSE值低。用Langmuir方程测定用于除去Ni(II),Cu(II),Cu(II),Zn(II),CD(II)和Pb(II)的SFC树脂的吸附容量,发现为0.815,1.104,1.215, 0.498和0.931 mmol / g。吸附过程遵循第一阶动力学,通过应用LAG-ERGREN方程获得特定速率常数K_R。热力学参数viz。还针对金属树脂系统计算了ΔG〜(ADS),ΔS〜(ADS)和ΔH〜(ADS)。外部扩散速率常数(k_s)和粒子漫射速率常数(k_(id)分别通过Spahn-Schlunder和Weber-Morris模型计算。使用各种解吸剂viz进行去索研究。去离子水,煮沸的水,各种浓度的HC1,氨,硫脲,柠檬酸和酒石酸。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号