首页> 外文期刊>Analytical methods >Box-Behnken design applied to optimize the ultrasound-assisted extraction of petroleum biomarkers in river sediment samples using green analytical chemistry
【24h】

Box-Behnken design applied to optimize the ultrasound-assisted extraction of petroleum biomarkers in river sediment samples using green analytical chemistry

机译:Box-Behnken设计应用于优化使用绿色分析化学在河沉积物样品中的超声辅助提取

获取原文
获取原文并翻译 | 示例
           

摘要

In the present paper, the 3(3) Box-Behnken design with a triplicate central point was used to optimize the conditions for the ultrasound-assisted extraction of n-alkanes (C10-C40) and isoprenoids (phytane and pristane), which are petroleum biomarkers and their derivatives, in river sediment samples. The determination was carried out using a Gas Chromatographer/Mass Spectrometer (GC/MS). The factors studied in the Box-Behnken design were the proportion of n-hexane and acetone in the solvent mixture, the length of sonication time, and the volume of the solvent mixture. The optimized conditions were 10 minutes of sonication, 10 mL of the solvent mixture, and a n-hexane/acetone mixture composition of 25 : 75 (v/v). These conditions were validated by assessing the recovered percentage that was obtained in the studies for the spiked blank and the spiked sample. The linear range was from 1 to 10 mg L-1 and the Pearson correlations for all the compounds were above 0.995. The detection limit ranged from 1.97 to 19.01 dry weight and 6.57 to 63.37 ng g(-1) dry weight for the quantification limit. The mean recoveries of the spiked samples ranged from 55.47 to 110.40% and 61.00 to 115.21% for the spiked blanks. Sediment samples were analyzed and the concentration of n-alkanes ranged from 25.80 to 511.00 ng g(-1) based upon the dry weight.
机译:在本文中,采用三份中央点的3(3)箱Behnken设计用于优化超声辅助提取N-烷烃(C10-C40)和异戊二烯(植物和普通烷)的条件,这是石油生物标志物及其衍生物,在河沉积物样本中。使用气相色谱器/质谱仪(GC / MS)进行测定。在箱Behnken设计中研究的因素是溶剂混合物中正己烷和丙酮的比例,超声处理时间的长度和溶剂混合物的体积。优化的条件为10分钟的超声处理,10ml溶剂混合物,N-己烷/丙酮混合物组合物为25:75(v / v)。通过评估掺入坯料和尖刺样品中获得的回收的百分比来验证这些病症。线性范围为1至10mg L-1,并且所有化合物的Pearson相关性高于0.995。检测极限范围为1.97至19.01条干重,6.57至63.37 ng g(-1)干重,用于定量限制。尖刺样品的平均回收率范围为尖刺坯料的55.47至110.40%和61.00至115.21%。分析了沉积物样品,基于干重,N-烷烃的浓度范围为25.80至511.00ng(-1)。

著录项

  • 来源
    《Analytical methods》 |2017年第40期|共9页
  • 作者单位

    Univ Fed Juiz de Fora Inst Ciencias Exatas Dept Quim NUPIS Nucleo Pesquisa Instrumentacao &

    Separacoes BR-36036900 Juiz De Fora MG Brazil;

    Univ Fed Juiz de Fora Inst Ciencias Exatas Dept Quim NUPIS Nucleo Pesquisa Instrumentacao &

    Separacoes BR-36036900 Juiz De Fora MG Brazil;

    Univ Fed Juiz de Fora Inst Ciencias Exatas Dept Quim GQAQ BR-36036900 Juiz De Fora MG Brazil;

    Univ Fed Juiz de Fora Inst Ciencias Exatas Dept Quim NUPIS Nucleo Pesquisa Instrumentacao &

    Separacoes BR-36036900 Juiz De Fora MG Brazil;

    Univ Fed Juiz de Fora Inst Ciencias Exatas Dept Quim NUPIS Nucleo Pesquisa Instrumentacao &

    Separacoes BR-36036900 Juiz De Fora MG Brazil;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 分析化学;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号