20-50 K and 40-80 K pulse tube coolers: Two candidates for a low temperature cooling chain

摘要

Following its important cryogenics heritage for the European Space industry for both Ariane launcher and Orbital programs, Air Liquide - Advanced Technology Division (AL/DTA) is proposing different pulse tube cryocoolers all over the temperature range to answer the needs of earth observation and scientific missions. This paper presents recent performance improvement of the large heat lift 40-80 K pulse tube cooler (LPTC). Four units have been manufactured and tested. Three units are dedicated to lifetime testing in the framework of French Military Space Program (under CNES contract) and Meteosat Third Generation program (ESA contract). The batch performances are described and the product maturity is discussed in this paper. To lower the temperature range and to complete our cryogenic chain, we developed in partnership with CEA/INAC/SBT, a heat intercepted 20-50 K pulse tube cryocooler. This cooler has been developed in the framework of an ESA contract (ESA/ESTEC No 20497/0/NL/PA-20-50 K pulse tube cooler). A development phase has been performed to test and optimize different cold head architectures to reach the 300 mW@20K specification. A no-load temperature of 12.5 K has been demonstrated on breadboard model. The outputs of the trade-off, the resulting design and the performances are described. In complement to the dilution cooler similar to the one developed for the PLANCK mission, those two pulse tube coolers are potential candidates for a very low temperature cooling chain. By optimizing the capabilities of the 20 K stage for low temperature operation (no-load in the range of 8 K) the coupling of the three independent stages becomes possible.