Effect of processing conditions of dicalcium phosphate cements on graft resorption and bone formation

摘要

Dicalcium phosphate cements (brushite and monetite) are resorbable biomaterials with osteoconductive potential for bone repair and regeneration that have yet to gain widespread commercial use. Brushite can be converted to monetite by heat treatments additionally resulting in various changes in the physicochemical properties. However, since conversion is most commonly performed using autoclave sterilisation (wet heating), it is uncertain whether the properties observed for monetite as a result of heating brushite under dry conditions affect resorption and bone formation favourably. This study was designed to produce monetite grafts of differing physical form by autoclaving and dry heating (under vacuum) to be compared with brushite biomaterials in an orthotopic pre-clinical implantation model in rabbit for 12 weeks. It was observed that monetite grafts had higher porosity and specific surface area than their brushite precursors. The autoclaved monetite grafts had compressive strength reduced by 50% when compared with their brushite precursors. However, the dry heat converted monetite grafts had compressive strength comparable with brushite. Results from in vivo experiments revealed that both types of monetite graft materials resorbed faster than brushite and more bone formation was achieved. There was no significant difference in the amount of bone formed between the two types of monetite grafts. The implanted brushite grafts underwent phase transformation to form hydroxyapatite, which ultimately limited bioresorption. However, this was not observed in both types of monetite grafts. In summary, both autoclaving and dry heating the preset brushite cement grafts resulted in monetite biomaterials which were more resorbable with potential to be investigated and optimized for orthopaedic and maxillofacial bone repair and regeneration applications.