...
首页> 外文期刊>Clinical and experimental ophthalmology >‘Blue bubble’ technique: an ab interno ab interno approach for Descemet separation in deep anterior lamellar keratoplasty using trypan blue stained viscoelastic device
【24h】

‘Blue bubble’ technique: an ab interno ab interno approach for Descemet separation in deep anterior lamellar keratoplasty using trypan blue stained viscoelastic device

机译:“蓝色泡沫”技术:使用台盼蓝染色粘弹性装置的深前层层板塑料术中DEEMET分离的AB Interno AB Interno方法

获取原文
获取原文并翻译 | 示例

摘要

Abstract Background In this study, we examined a novel variant of ‘big‐bubble’ deep anterior lamellar keratoplasty using trypan‐blue‐stained viscoelastic device for the creation of a pre‐descemetic bubble. Methods Ten corneoscleral rims were mounted on an artificial anterior chamber (AC). The AC was filled with air through a limbal paracentesis. A Melles' triangulated spatula was inserted through the paracentesis, with its tip penetrating the AC, was then slightly retracted and pushed into the deep stroma above the roof of the paracentesis. A mixture of trypan blue and viscoelastic device (Healon, Abbott Medical Optics, Abbott Park, Illinois) was injected into this intra‐stromal pocket using a 27‐G cannula to create a pre‐descemetic separation bubble. Bubble type and visualization of dyed viscoelastic device were noted. The method was later employed in three cases. Results In all 10 corneoscleral rims, the technique successfully created a visible pre‐descemetic (type 1) bubble that could be expanded up to the predicted diameter of trephination. Subsequent trephination and the removal of corneal stroma were uneventful. In two out of four clinical cases, a type 1 bubble was created, while in two others, visco‐dissection failed and dyed viscoelastic was seen in the AC. Conclusions The presented technique holds promise of being a relatively easy to perform, predictable and well‐controlled alternative for achieving a type 1 bubble during deep anterior lamellar keratoplasty surgery. The trypan‐blue‐stained viscoelastic device facilitates proper visualization and control of the separation bubble and assists in identifying the penetrance to the separation bubble prior to removal of the stromal cap.
机译:摘要背景在这项研究中,我们使用台盼蓝染色的粘弹性装置检查了一部新型'大泡泡'深侧板角膜塑料术,用于制作预转化泡沫。方法安装十个角膜外轮圈安装在人工前室(AC)上。 AC通过斜腹腹腔穿过空气。梅勒斯的三角形刮刀通过腹向插入,其尖端穿透AC,然后略微缩回并推入玻璃腹板顶部的深层​​基质中。使用27-g套管将台盼蓝和粘弹性装置(HealOn,Abbott Medical Optics,Abbott Park,伊利诺伊州,伊利诺伊州,伊利诺伊州)的混合物喷射到该基质内袋中,以产生预调用分离泡。注意到染色粘弹性装置的泡型和可视化。该方法稍后在三种情况下使用。结果所有10个CorneoScleral轮辋,该技术成功地创建了可见的预解毒(型)气泡,可以扩展到曲程的预测直径。随后的曲程和角膜基质的去除是不行的。在四种临床病例中有两种,产生1型气泡,而在另外两个中,在AC中看到粘接粘接和粘弹性染色。结论所提出的技术认为,在深前侧层状角膜形插术手术中实现1型泡沫的表现相对容易,可预测和良好控制的替代方案。台盼蓝染色的粘弹性装置有助于适当的可视化和对分离气泡的控制,并有助于在去除基质帽之前识别分离气泡的渗透。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号