...
首页> 外文期刊>Chemical Engineering Communications >Evaluation of the effects of operational parameters in the pretreatment of sugarcane bagasse with diluted sulfuric acid using analysis of variance
【24h】

Evaluation of the effects of operational parameters in the pretreatment of sugarcane bagasse with diluted sulfuric acid using analysis of variance

机译:用差异分析评价稀硫酸预处理在甘蔗泡沫预处理中的作用

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The pretreatment of lignocellulosic residues has been extensively studied as a method to disrupt the cellulose-hemicelluloses-lignin complex in biomass to access the sugars in their respective components. In this work, we carried out a study using sulfuric acid pretreatment of sugarcane bagasse by varying the following operational parameters: solid loading (10-30% of bagasse relative to the volume of the sulfuric acid solution), sulfuric acid concentration (0.5-2.5% relative to the dry mass of bagasse), reaction time (5-25 min), and temperature (135-195 degrees C). The obtained solids from each pretreatment condition were submitted to enzymatic hydrolysis under the same process conditions: 0.232 g of Celluclast 1.5 L and 0.052 g of Novozym 188 per g of pretreated sugarcane bagasse, 72 h of hydrolysis, and 200 rpm of agitation at 50 degrees C. Using central composite rotational design configuration in the experiments and analysis of variance, the results indicate that the conditions that produced larger quantities of glucose by enzymatic hydrolysis (0.35 g glucose/g pulp) with minimum amounts of degradation products were as follows: 20% solids loading, 15 min of reaction time, 1.5% sulfuric acid, and a minimum temperature of reaction of 170 degrees C.
机译:已经广泛地研究了木质纤维素残留物的预处理作为破坏生物质中的纤维素 - 半纤维素 - 木质素复合物的方法,以进入各自的组分中的糖。在这项工作中,我们通过改变以下操作参数来进行使用硫酸预处理的研究:固体载荷(相对于硫酸溶液的体积的甘蔗渣的10-30%),硫酸浓度(0.5-2.5 %相对于甘蔗渣的干料),反应时间(5-25分钟)和温度(135-195℃)。在相同的工艺条件下将来自每种预处理条件的得到的固体提取至酶水解:0.232g Celluclast 1.5L和0.052g每G预处理的甘蔗泡沫,72小时的水解,200rpm的搅拌下为50度C.在实验中使用中央复合旋转设计配置和方差分析,结果表明,通过酶水解(0.35g葡萄糖/ G纸浆)产生更大量的降解产物的葡萄糖的条件如下:20 %固体加载,15分钟的反应时间,硫酸1.5%,最低温度为170℃。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号