首页> 外文期刊>ChemSusChem >Optimization of Hydrothermal Pretreatment of Lignocellulosic Biomass in the Bioethanol Production Process
【24h】

Optimization of Hydrothermal Pretreatment of Lignocellulosic Biomass in the Bioethanol Production Process

机译:生物乙醇生产过程中木质纤维素生物质水热预处理的优化

获取原文
获取原文并翻译 | 示例
           

摘要

The natural resistance to enzymatic deconstruction exhibited by lignocellulosic materials has designated pretreatment as a key step in the biological conversion of biomass to ethanol. Hydrothermal pretreatment in pure water represents a challenging approach because it is a method with low operational costs and does not involve the use of organic solvents, difficult to handle chemicals, and external liquid or solid catalysts. In the present work, a systematic study has been performed to optimize the hydrothermal treatment of lignocellulosic biomass (beech wood) with the aim of maximizing the enzymatic digestibility of cellulose in the treated solids and obtaining a liquid side product that could also be utilized for the production of ethanol or valuable chemicals. Hydrothermal treatment experiments were conducted in a batch-mode, high-pressure reactor under autogeneous pressure at varying temperature (130220?degrees C) and time (15180 min) regimes, and at a liquid-to-solid ratio (LSR) of 15. The intensification of the process was expressed by the severity factor, log?Ro. The major changes induced in the solid biomass were the dissolution/removal of hemicellulose to the process liquid and the partial removal and relocation of lignin on the external surface of biomass particles in the form of recondensed droplets. The above structural changes led to a 2.5-fold increase in surface area and total pore volume of the pretreated biomass solids. The enzymatic hydrolysis of cellulose to glucose increased from less than 7 wt?% for the parent biomass to as high as 70 wt?% for the treated solids. Maximum xylan recovery (60 wt?%) in the hydrothermal process liquid was observed at about 80 wt?% hemicellulose removal; this was accomplished by moderate treatment severities (log?Ro=3.84.1). At higher severities (log?Ro=4.7), xylose degradation products, mainly furfural and formic acid, were the predominant chemicals formed.
机译:木质纤维素材料表现出的酶抗性的抗性指定为乙醇生物量生物量的重点阶段的预处理。纯水中的水热预处理代表了一个具有挑战性的方法,因为它是运营成本低的方法,并且不涉及使用有机溶剂,难以处理化学品和外液或固体催化剂。在本作工作中,已经进行了系统研究以优化木质纤维素生物质(山毛榉木)的水热处理,目的是最大化纤维素在处理过的固体中的酶消化率,并获得也可以用于的液体侧产物生产乙醇或有价值的化学品。在不同温度(130220℃)和时间(15180分钟)和时间(LSR)的液体 - 实际比(LSR)下,在分批的高压反应器下以分批的高压反应器进行批量压力进行分批的高压反应器进行。该过程的增强由严重程度因子表示,log?ro。固体生物质中诱导的主要变化是将半纤维素的溶解/除去半纤维素与过程液体的部分除去和迁移和迁移在恢复液滴的形式的生物质颗粒外表面上。上述结构变化导致表面积增加2.5倍,预处理的生物质固体的总孔体积增加。纤维素的酶水解到葡萄糖的酶法从母体生物质的少于7重量%,高达70重量%的处理过的固体。在约80重量%的半纤维素中除去水热处理液中的最大木聚糖回收(60wt≤%);这是通过中等治疗的严重性完成的(日志?RO = 3.84.1)完成。在更高的严重主义(log?Ro = 4.7)中,木糖降解产物主要是糠醛和甲酸,是形成的主要化学品。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号