首页> 外文期刊>Cellulose >A novel nanocomposite membrane containing modified cellulose nanocrystals for copper ion removal and dye adsorption from water
【24h】

A novel nanocomposite membrane containing modified cellulose nanocrystals for copper ion removal and dye adsorption from water

机译:含有改性纤维素纳米晶体的新型纳米复合膜,用于铜离子去除和染料吸附水

获取原文
获取原文并翻译 | 示例
           

摘要

The aim of this study was developing novel membranes based on polyethersulfone (PES) as matrix and amine functionalized cellulose nanocrystals (CNC) as nanofiller for copper ion and direct red-16 removal from water. The surface modification of CNC was performed using (3-aminopropyl)triethoxysilane (APTES) and confirmed by Fourier transform infrared spectroscopy and energy dispersive X-ray spectroscopy. Then, PES membranes were prepared by embedding various concentrations (0, 0.1, 0.5, and 1wt%) of modified CNC (MCNC). The results showed that the maximum adsorption capacity of copper ions was 90% for membranes containing 1wt% MCNC. Dye removal percentage was 89% for neat PES and increased to 99% for 1wt% MCNC loading. The outcomes of this study demonstrated that incorporating this type of modified CNC in PES membranes improved the efficacy of impurities removal from water and can be suggested as a simple technique for water filtration.
机译:本研究的目的是基于聚醚砜(PE)作为基质和胺官能化纤维素纳米晶体(CNC)作为铜离子的纳米氧化物的基于聚醚砜和胺官能化的新型膜,并从水中直接去除红16。 使用(3-氨丙基)三乙氧基硅烷(Aptes)进行CNC的表面改性,并通过傅里叶变换红外光谱和能量分散X射线光谱证实。 然后,通过将各种浓度(0,0.1,0.5和1wt%)改性的CNC(MCNC)嵌入各种浓度(0,0.1,0.5和1wt%)来制备PES膜。 结果表明,含有1wt%MCNC的膜的铜离子的最大吸附容量为90%。 对于整洁PE的染料除去百分比为89%,1wt%MCNC负荷增加至99%。 本研究的结果证明,在PES膜中掺入这种改性CNC改善了杂质从水中去除的功效,并且可以建议作为水过滤的简单技术。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号