...
首页> 外文期刊>Cellulose >Diffusion and phase separation at the morphology formation of cellulose membranes by regeneration from N-methylmorpholine N-oxide solutions
【24h】

Diffusion and phase separation at the morphology formation of cellulose membranes by regeneration from N-methylmorpholine N-oxide solutions

机译:通过N-甲基丙酮N-氧化物溶液再生的纤维素膜形态形成的扩散和相位分离

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Phase separation of polymer solutions initiated by the addition of a nonsolvent is the main method for the preparation of polymer membranes. Depending on the application, such membranes must have a different pore size, which depends on the numerous parameters of the forming process. The liquid-liquid phase separation has been considered for cellulose solutions in N-methylmorpholine N-oxide (NMMO) interacting with various alcohols (methyl, ethyl, isopropyl, and isobutyl). Kinetics of cellulose regeneration was investigated by laser interferometry technique to understand the mechanism of cellulose film structure formation in the NMMO process. Influence of temperature, coagulant nature, and cellulose content on the process kinetics and morphology of the films was studied and corresponding interdiffusion coefficients were calculated. Based on the solubility parameters, triple phase diagrams of the systems were calculated. Formation of different morphologies was explained primarily by the different position of the composition path, the bimodal curve, and the gelation line in the phase diagrams. The second important parameter was the different rate of mutual diffusion of the NMMO and coagulants, due to the difference in the viscosity of the latter. Using methanol or ethanol as coagulation baths leads to obtaining the nanoporous structure of cellulose films, whereas isopropanol and isobutanol favors macropore formation.
机译:通过添加非溶剂引发的聚合物溶液的相分离是制备聚合物膜的主要方法。根据应用,这种膜必须具有不同的孔径,这取决于成形过程的许多参数。已经考虑了液 - 液相分离,用于与各种醇(甲基,乙基,异丙基和异丁基)相互作用的N-甲基丙酮N-氧化物(NMMO)中的纤维素溶液。激光干涉测量技术研究了纤维素再生的动力学,以了解NMMO工艺中纤维素膜结构的机理。研究了温度,凝结性质和纤维素含量对膜的过程动力学和形态的影响,并计算了相应的间隔系数。基于溶解度参数,计算系统的三相图。不同形态的形成主要由组合物路径,双峰曲线和相图中的凝胶管线的不同位置解释。由于后者的粘度差异,第二重要参数是NMMO和凝结剂的相互扩散速率不同。用甲醇或乙醇作为凝固浴,导致获得纤维素薄膜的纳米多孔结构,而异丙醇和异丁醇源于大孔形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号