Oxidation studies of Indian reduced activation ferritic martensitic steel

摘要

The paper reports the oxidation behaviour of Indian variety of reduced activation ferritic martensitic steel (RAFMS) proposed to be used as a first wall material in test blanket module in ITER and future fusion reactors. Oxidation of first wall can occur in case of a catastrophic leak in the vacuum vessel of fusion reactor. The oxidation of Indian RAFMS was done at 450-650 A degrees C. Long-term oxidation for 25, 50 and 100 h was studied at 550 A degrees C. A mass gain/unit area vs time was plotted and oxidation kinetics determined. The cross section SEM of the oxidised RAFMS was done. The SEM micrographs showed two distinct layers of oxides that have formed with total thickness of around 10 A mu m. Glancing-angle XRD showed that the top layer is essentially a mixture of magnetite and haematite. A strong enrichment of Cr is visible in a narrow band below the top layer near the scale/alloy interface. It was found that formation of this Cr-rich spinel mid-layer ensures the short-term and long-term oxidation resistance of IN-RAFMS in case of any accidental leak in fusion reactor conditions.