...
首页> 外文期刊>Journal of Sound and Vibration >Effect of rotor deformation and blade loading on the leakage noise in low-speed axial fans
【24h】

Effect of rotor deformation and blade loading on the leakage noise in low-speed axial fans

机译:转子变形和叶片加载对低速轴向风扇漏噪声的影响

获取原文
获取原文并翻译 | 示例

摘要

The noise generated by the leakage flow in rotors provided with rotating shroud has been experimentally studied by means of acoustic measurements in an anechoic chamber and the basic features of the noise generating mechanism have been identified by means of LDV and PIV aerodynamic measurements.The acoustic tests, performed at constant rotational speed and during speed ramps, have shown a combined dependence of the received SPL spectra on the rotor axial position, on the rotational speed, and on the operating point. It has been shown that the confinement of the recirculating flow may result in a stronger noise, that the acoustic similarity is often not respected by the leakage noise, and that, in a number of situation, the pattern of the SPL spectrum has a sudden change as the rotational speed or the pressure coefficient exceed a certain value.The aerodynamic measurements have confirmed that the flow structures spouted from the gap have a non-periodic component and that, basically, two flow patterns exist which correspond to the two kinds of SPL spectra: a recirculation bubble anchored to the rotor shroud or a large recirculation zone. The former corresponds to a higher SPL than the latter, and the reason for this is that if the recirculation bubble is attached, a weaker mixing of the recirculating flow takes place. The suddenness in the SPL spectra transition is likely caused by an analogous flow pattern modification.Rotational speed and pressure rise may act on both the momentum of the recirculating flow and the change in shape of the gap geometry due to the rotor deformation. Possibly, the rotational speed acts on the Reynolds number of the gap flow, but it has not been possible to identify such an effect.
机译:通过在透明室中的声学测量实验,通过在一个消声室中进行了通过声学测量来实验所提供的转子产生的噪声,并且通过LDV和PIV空气动力学测量来识别噪声产生机构的基本特征。声学测试以恒定的旋转速度和速度斜坡在旋转速度期间执行,在转子轴向位置和操作点上示出了接收的SPL光谱对转子轴向位置的组合依赖性。已经表明,循环流动的限制可能导致更强的噪声,即声学相似度通常不会受到泄漏噪声的尊重,并且在许多情况下,SPL谱的模式突然变化随着旋转速度或压力系数超过一定的值。空气动力学测量已经证实,从间隙喷射的流动结构具有非周期性组分,并且基本上存在两个流动模式,其对应于两种SPL光谱:将锚定到转子护罩或大再循环区域的再循环气泡。前者对应于比后者更高的SPA切,而原因是如果附着再循环气泡,则发生再循环流动的较弱混合。 SPL光谱转变中的突然性可能是由类似的流动模式改性引起的。提样速度和压力升高可能对循环流动的动量和由于转子变形而导致的间隙几何形状的变化作用。可能,旋转速度作用于雷诺流的间隙流量,但是没有能够识别这种效果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号