3D interconnected high aspect ratio tellurium nanowires in epoxy nanocomposites: serving as thermal conductive expressway

摘要

Heat removal via thermal management materials is attracting more and more attention in the electronic industry. Conventional particle/polymer thermal conductive composites require a high filler loading ratio (30 vol %), which cause severe thermal interfacial resistance and mechanical issue. In this work, we fabricate tellurium nanowires (NWs)/epoxy nanocomposites via a facile bar coating method. According to Agari model and Maxwell-Eucken model, the as-synthesized ultra-long NWs with high aspect ratio (100) construct the 3D interconnected thermal conductive network better in resin matrix to facilitate the heat transfer process. The results show that at a low loading ratio of 2.4 vol %, this nanocomposite exhibits the out-of-plane and in-plane thermal conductivity of 0.378 and 1.63 W m(-1) K-1, respectively, which is 189 and 715% higher than that of pure epoxy resin. Importantly, good stability, and flexibility of nanocomposites are well maintained. (c) 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47054.