Development and microstructure characterization of single and duplex nitriding of UNS S31803 duplex stainless steel

摘要

Abstract In this work, the development of a duplex nitriding (DN) surface treatment combining High Temperature Gas Nitriding (HTGN) and Low Temperature Plasma Nitriding (LTPN) is reported. The microstructure and hardness variation of the duplex treated steel is compared with the properties obtained during single HTGN and single LTPN of UNS S31803 stainless steel. Single LTPN of UNS S31803 was carried out in an Active Screen Plasma Nitriding reactor, at 400°C for 20h, in a 75% N2+25% H2 atmosphere. Single HTGN of UNS S31803 was carried out at 1200°C, under a 0.1MPa high purity N2 gas atmosphere, during 8h. The developed duplex nitriding (DN) surface treatment consists of a combination of both, HTGN and LTPN treatments, carried out in the same conditions described above. The microstructure of the as received material was composed by ferrite and austenitic stringers, aligned in the rolling direction. The results showed that LTPN of the UNS S31803 duplex stainless steel promotes the formation of a duplex modulated structure composed by 2.5μm thick, 1510±52HV hard, expanded ferrite (αN) regions, and 3.0μm thick, 1360±81HV hard, expanded austenite (γN) regions on ferrite and austenite grains, respectively. Intense coherent ε-Fe3N nitride precipitation inside expanded ferrite was observed. ε-Fe3N nitrides precipitated with an orientation relationship [111] αN//[120] ε-Fe3N, leading to increased microhardness of the expanded ferrite regions. After the first step of the duplex nitriding treatment (HTGN) a 550μm thick, 330HV hard, nitrogen rich, fully austenitic layer formed at the surface of the specimens, by transformation of ferrite stringers into austenite. The second nitriding step (LTPN) led to the formation of a homogeneous expanded austenite layer, 1227±78HV on top of the thick fully austenitic layer, formed during the first step. The duplex treatment resulted in a more homogeneous, precipitate-free, microstructure and a better transition between the mechanical properties of the hardened outermost layer and the softer substrate. Highlights ? LTPN of 31803 DSS forms a nitrided layer composed by expanded γN and αN phases. ? During LTPN, ε-Fe3N nitrides precipitate in αN with