首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >Structural evolution from shish-kebab to fibrillar crystals during hot-stretching process of gel spinning ultra-high molecular weight polyethylene fibers obtained from low concentration solution
【24h】

Structural evolution from shish-kebab to fibrillar crystals during hot-stretching process of gel spinning ultra-high molecular weight polyethylene fibers obtained from low concentration solution

机译:从低浓度溶液获得的凝胶纺丝超高分子量聚乙烯纤维的凝胶旋转过程中的烤肉 - kebab对纤维状晶体的结构演变

获取原文
获取原文并翻译 | 示例
           

摘要

The pre-stretched gel-spinning ultra-high molecular weight polyethylene fibers with low concentration solution obtained from industrial production line were used to study the structural transition from shishkebab to fibrillar crystals during hot-stretching process via in-situ small-angle X-ray scattering, wideangle X-ray diffraction measurements, and scanning electron microscopy. With the increase of hotstretching strain, the kebab crystals (lamellae) undergo stress-induced fragmentation and recrystallization at 90, 100, and 110 degrees C and melting and recrystallization at 120 degrees C to transform to fibrillar crystals. Furthermore, the shish length of pre-stretched fibers at all stretching temperatures first increase and then gradually decrease with the strain, but the number of shish continuously increase and the shish diameter increase firstly and finally keep almost constant. The degree of crystal orientation for all stretching temperatures is as high as above 0.9 during the whole stretching process. These results indicate that the shish-kebab crystals of ultra-high molecular weight polyethylene fibers prepared from low concentration solution can smoothly transform to fibrillar crystals through the hot stretching process. (C) 2017 Published by Elsevier Ltd.
机译:使用原始生产线的低浓度溶液的预拉伸凝胶纺丝超高分子量聚乙烯纤维研究了在热拉伸过程中通过原位小角X射线研究了从Shishkebab到纤维晶体的结构转变散射,扩展X射线衍射测量和扫描电子显微镜。随着炎热的菌株的增加,Kebab晶体(Lamellae)在90,100和110℃下进行应力诱导的碎裂和重结晶,并在120℃下熔化和重结晶以转化为纤维晶体。此外,在所有拉伸温度的预拉伸纤维的膜长度首先增加,然后随着菌株逐渐减小,但六兰的数量持续增加,膜直径首先增加,最终保持几乎恒定。在整个拉伸过程中,所有拉伸温度的晶体取向程度高于0.9。这些结果表明,由低浓度溶液制备的超高分子量聚乙烯纤维的乳蛋白晶体可以通过热拉伸过程平滑地转化为纤维晶体。 (c)2017年由elestvier有限公司出版

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号