...
首页> 外文期刊>Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter >Mitigation of RB noise in bidirectional fiber transmission systems based on different OFDM SSB techniques
【24h】

Mitigation of RB noise in bidirectional fiber transmission systems based on different OFDM SSB techniques

机译:基于不同OFDM SSB技术的双向光纤传输系统RB噪声的减轻

获取原文
获取原文并翻译 | 示例
           

摘要

The interferometric beat noise due to the reflections (RE) from passive devices and the Rayleigh backscattering (RB) in wavelength reuse bidirectional fiber optic transmission systems leads to degradation of the system if not employed with a suitable RB mitigation technique. These noises can be reduced by implementation of the modulation schemes which reduce the spectral overlap between the data signal and RB-RE signals. In this paper, a bidirectional architecture to reduce RB-RE noise in wavelength reused bidirectional Radio over Fiber (RoF) is proposed. Optical Orthogonal Frequency Division Multiplexing (OFDM) Single Sideband (SSB) techniques are used for upstream and downstream transmission. Two SSB millimeter wave signals viz. conventional SSB and modified SSB are generated by the MZM employing a hybrid coupler to generate different phase shifts (90 degrees & 120 degrees) of the RF signal applied to its electrodes. In our architecture, the spectral overlap between the data signal and RB-RE signals is reduced by transmitting the downstream and upstream signals on the higher and lower first order optical sidebands of the SSB signal respectively. A mathematical model is developed to analyze the transmission performance of the two SSB techniques based on RB-RE interferences. An m-QAM optical OFDM baseband modulation scheme is used to transmit 10 Gbps data over 75 km fiber using the two SSB modulation schemes. Our results show that the modified SSB eliminates 2nd order RB-RE harmonics reduces RB-RE crosstalk against the conventional SSB.
机译:所述干涉拍噪声由于来自无源器件的反射(RE)及瑞利后向散射(RB)在波长复用的双向光纤传输系统导致如果没有与合适的RB减轻技术中使用的系统的退化。可以通过执行这降低了数据信号和RB-RE信号之间的光谱重叠的调制方案来减小这些噪音。在本文中,一个双向架构,以减少在波长通过光纤(光载无线)重复使用的双向无线电RB-RE噪声提出。光学正交频分复用(OFDM)单边带(SSB)技术被用于上行和下行传输。两个SSB毫米波信号即。常规SSB和改性SSB通过采用混合耦合器,以产生RF信号的不同相移(90度&120度)施加到其电极上的MZM产生。在我们的体系结构,数据信号和RB-RE信号之间的光谱重叠,通过分别对SSB信号的较高和较低的一阶光边带发送所述下行和上行信号减小。一个数学模型来分析的基础上RB-RE干扰两个SSB技术的传输性能。一个m-QAM光OFDM基带调制方案是使用两个SSB调制方案用于传输10个Gbps的数据超过75公里纤维。我们的研究结果表明,改进SSB消除二阶RB-RE谐波降低RB-RE串扰对传统SSB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号