...
首页> 外文期刊>RSC Advances >C2H5OH and NO2 sensing properties of ZnO nanostructures: correlation between crystal size, defect level and sensing performance
【24h】

C2H5OH and NO2 sensing properties of ZnO nanostructures: correlation between crystal size, defect level and sensing performance

机译:ZnO纳米结构的C2H5OH和No2感测性能:晶体尺寸,缺陷水平与感测性能之间的相关性

获取原文
获取原文并翻译 | 示例

摘要

ZnO nanostructures can be synthesized using different techniques for gas sensor applications, but different synthesis methods produce different morphologies, specific surface areas, crystal sizes, and physical properties, which consequently influence the gas-sensing properties of materials. Many parameters such as morphology, specific surface areas, crystal sizes, and defect level can influence the gas-sensing properties of ZnO nanostructures. However, it is not clear which parameter dominates the gas-sensing performance. This study clarified the correlation between crystal size, defect level, and gas-sensing properties of ZnO nanostructures prepared from hydrozincite counterparts by means of field emission scanning electron microscopy, high resolution transmission electron microscopy, X-ray diffraction and photoluminescence spectra. Results showed that the average crystal size of the ZnO nanoparticles increased with thermal decomposition temperatures from 500 degrees C to 700 degrees C. However, the sample treated at 600 degrees C, which has the lowest visible-to-ultraviolet band intensity ratio showed the highest response to ethanol and NO2. These results suggested that defect level but not size is the main parameter dominating the sensor performance. The gas sensing mechanism was also elucidated on the basis of the correlation among decomposition temperatures, crystal size, defect level, and gas sensitivity.
机译:可以使用不同的气体传感器应用技术合成ZnO纳米结构,但不同的合成方法产生不同的形态,比表面积,晶体尺寸和物理性质,从而影响了材料的气体传感性质。许多参数,如形态,比表面积,晶体尺寸和缺陷水平可以影响ZnO纳米结构的气体传感性质。但是,尚不清楚哪个参数主导气体传感性能。本研究阐明了通过现场发射扫描电子显微镜,高分辨率透射电子显微镜,X射线衍射和光致发光光谱由羟基型对应物制备的ZnO纳米结构的晶体尺寸,缺陷水平和气体感测性能之间的相关性。结果表明,ZnO纳米粒子的平均晶体尺寸随500℃至700℃的热分解温度而增加。然而,在600℃下处理的样品具有最低可见光紫外带强度比显示最高反应乙醇和NO2。这些结果表明,缺陷水平但不尺寸是主导传感器性能的主要参数。还基于分解温度,晶体尺寸,缺陷水平和气体敏感性之间的相关性阐明了气体传感机理。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号