首页> 外文期刊>Environmental Science and Pollution Research >Facile architecture of highly effective nanofibrous membrane adsorbent via electrospun followed by hydrothermal carbonization for potential application in dye removal from water
【24h】

Facile architecture of highly effective nanofibrous membrane adsorbent via electrospun followed by hydrothermal carbonization for potential application in dye removal from water

机译:高效纳米纤维膜吸附剂通过Electromat扫描剂的容纳结构,然后是水热碳化,用于从水中去除染料中的潜在应用

获取原文
获取原文并翻译 | 示例
           

摘要

Rapid removal of toxic dye pollutants in water by conventional materials is ineffective and expensive that warrants the necessity for the architecture of hybrid nanofibrous membrane through layer by layer deposition using electrospinning method. In order to achieve this, here we demonstrated the electrospun fabrication of graphene/ferrocene intercalated polyacrylonitrile nanofibrous (GFPN) membrane through hydrothermal carbonization (HTC) method and studied its potential adsorption properties for the removal of environmental pollutants. An aqueous dispersion of graphene/ferrocene (1?mg/mL) stabilized by the polymeric backbone was prepared by the solvent homogenization method and electrospun to yield nanofibrous membrane and further characterized by several analytical and spectroscopic techniques. Raman and XPS investigations corroborated the intercalation of graphene/Fe decorated onto the nanofibrous network. Adsorption experiments found that the GFPN membrane achieved more than 90% removal of anionic Congo red (CR) dye within 30?min in the aqueous phase irrespective of the concentration and takes some additional time for attaining the equilibrium. The longevity and stability of the membrane was studied by conducting successive adsorption-desorption cycles for the regeneration of its adsorption properties. The de-coloration mechanism was comprehensively investigated through the mathematical approaches using the kinetic and intraparticle diffusion studies and confirmed with the experimental findings through IR and XPS spectroscopic techniques. In a nutshell, this work focuses on the fabrication of hybrid nanofibrous membrane and studied its adsorption properties through varying concentrations of dye (20 to 150?mg/L). Moreover, this work extensively explored the mechanism associated with the adsorption process and specifically emphasize the existence of combined phenomena during the process, i.e., anion-cation interactions, hydrogen bonding, and successive stages of intraparticle diffusion through the comparative elucidation of both theoretical and experimental approaches.
机译:通过常规材料快速去除在水中有毒染料污染物是无效的,并且昂贵,以使用静电纺丝法通过层沉积来保证通过层沉积的杂化纳米纤维膜结构的必要性。为了实现这一点,在这里,我们通过水热碳化(HTC)方法证明了石墨烯/二茂铁插入聚丙烯腈纳米纤维(GFPN)膜的静纺制造,并研究了其潜在的吸附性能以去除环境污染物。通过溶剂均化方法和ElectromatOM制备由聚合物主链稳定的石墨烯/二茂铁(1→Mg / ml)的水分散体,得到纳米纤维膜,并进一步具有几种分析和光谱技术的特征。拉曼和XPS调查证实了石墨烯/ Fe装饰到纳米纤维网络上的插入。吸附实验发现,无论浓度如何,GFPN膜在水相中取得了超过90%的阴离子刚果红色(Cr)染料在水相中除去,并且需要一些额外的时间来获得平衡。通过进行连续吸附 - 解吸循环来研究膜的寿命和稳定性,用于再生吸附性能。通过使用动力学和骨科扩散研究的数学方法全面研究了去色机制,并通过IR和XPS光谱技术通过实验结果证实。简而言之,该工作侧重于杂化纳米纤维膜的制造,并通过改变浓度(20至150×mg / L)来研究其吸附性能。此外,该工作广泛探索了与吸附过程相关的机制,并明确地强调在过程中,即阴离子阳离子相互作用,氢粘合剂和妓女扩散的连续阶段通过理论和实验的比较阐明来强调组合现象的存在方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号