...
首页> 外文期刊>Electrochimica Acta >Large-scale synthesis of nitrogen-rich hierarchically porous carbon as anode for lithium-ion batteries with high capacity and rate capability
【24h】

Large-scale synthesis of nitrogen-rich hierarchically porous carbon as anode for lithium-ion batteries with high capacity and rate capability

机译:具有高容量和速率能力的锂离子电池的阳极大规模合成氮的分层多孔碳

获取原文
获取原文并翻译 | 示例

摘要

Despite successful commercialization of graphite in lithium ion batteries (LIBs), it is still necessary to develop cost-efficient carbon materials with high capacity and rate capability. Here we report a nitrogen-rich (17.72 at%), hierarchically porous carbon (NHPC) produced by low-cost and large-scale synthetic method through spray granulation followed by pyrolysis under flowing NH3. The synthetic approach featuring using low-cost raw materials (glycine as carbon/nitrogen source and NaCl as template) and industrial spray granulation shows promising application in commercial practice. Benefitting from the rich nitrogen doping and homogeneously porous structure, the NHPC delivers a reversible capacity as high as 1276.5 mA h g(-1) at current density of 100mA g(-1) when used as anode for LIB. After 200 cycles at current density of 500mA g(-1), a reversible capacity of 930.6 mA h g(-1) remains without any capacity fading compared to the second cycle, showing good electrochemical performance. Even at higher current density of 2 A g(-1), a reversible capacity of 582.6 mA h g(-1) is achieved, highlighting the superior rate capability compared with most reported carbon-based materials. The mechanism of lithium storage in NHPC is studied in depth by kinetic analysis to figure out the reason for the achieved much higher capacities and rate capability than the theoretical capacity (372 mA h g(-1), by forming LiC6) and most reported ones. It is found that there exists considerable capacitive charge storage owing to the adsorbed lithium on the surface of carbon in NHPC, which resulted in the superior rate capability and cycling stability. Besides the adsorbed lithium (capacitive charge storage) and inserted lithium (by forming LiC6 or LiC6@Li4C3N4), deposited lithium in micropores is also found to contribute to achieving the high lithium storage of NHPC. (c) 2019 Elsevier Ltd. All rights reserved.
机译:尽管在锂离子电池(LIBS)中成功地商业化石墨,但仍有必要开发具有高容量和速率能力的成本效益。在这里,我们通过喷雾造粒报告通过低成本和大规模的合成方法生产的富含富含氮(17.72at%),通过喷雾造粒,然后在流动的NH 3下进行热解,得到富含氮的多孔碳(NHPC)。使用低成本原料(甘氨酸作为碳/氮源和NaCl作为模板)和工业喷雾造粒的合成方法显示了商业实践的有希望的应用。富含氮掺杂和均匀多孔结构的益处,当用作Lib的阳极时,NHPC以100mA G(-1)的电流密度高达1276.5 mA H G(-1)的可逆容量。在500mA g(-1)的电流密度下200次循环后,与第二循环相比,可逆容量为930.6 mA H g(-1)没有任何容量衰落,显示出良好的电化学性能。甚至在较高电流密度为2Ag(-1)时,实现了582.6 mA H G(-1)的可逆容量,与大多数报告的碳材料相比,突出了优异的速率能力。通过动力学分析研究了NHPC中锂储存机制,弄清楚了达到更高的容量和速率能力的原因,而不是理论能力(372mA Hg(-1),通过形成LiC6)和大多数报道的能力。发现由于NHPC中的碳表面上的吸附锂存在相当大的电容电荷存储,这导致了优异的速率能力和循环稳定性。除了吸附的锂(电容电荷储存)和插入锂(通过形成LiC6或LiC6 @ Li4C3N4)之外,还发现沉积的锂锂锂,以实现NHPC的高锂储存。 (c)2019 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号