...
首页> 外文期刊>Journal of Nuclear Materials: Materials Aspects of Fission and Fusion >Gas porosity evolution and ion-implanted helium behavior in reactor ferritic/martensitic and austenitic steels
【24h】

Gas porosity evolution and ion-implanted helium behavior in reactor ferritic/martensitic and austenitic steels

机译:反应堆铁素体/马氏体和奥氏体钢的气孔演化和离子注入氦行为

获取原文
获取原文并翻译 | 示例
           

摘要

The peculiarities of gas porosity formation and helium retention and release in reactor ferritic/martensitic EP-450 and EP-450-ODS and austenitic ChS-68 steels are investigated by transmission electron microscopy and helium thermal desorption spectrometry (HTDS). The samples were irradiated by 40 keV He+ ions up to a fluence of 5 . 10(20) m(-2) at 293 and 923 K. An nonuniform distribution of helium bubbles and high-level gas swelling in ferritic/martensitic steels were found at high-temperature helium implantation. The same irradiation conditions result in formation of uniformly distributed helium bubbles and low-level swelling in ChS-68 steel. Temperature range of helium release from EP-450-ODS steel was considerably wider in comparison to HTDS-spectra of the EP-450 steel. A considerable quantity of helium is released from ODS steel in the high-temperature range after the main peak of the HTDS-spectrum. (C) 2015 Elsevier B.V. All rights reserved.
机译:通过透射电子显微镜和氦热解吸光谱法(HTDS)研究了反应堆铁素体/马氏体EP-450和EP-450-ODS和奥氏体ChS-68钢中气体孔隙形成,氦气保留和释放的特点。用40 keV He +离子辐照样品,通量为5。在293和923 K时为10(20)m(-2)。在高温氦注入下,在铁素体/马氏体钢中发现了氦气泡的不均匀分布和高水平的气体溶胀。相同的照射条件导致ChS-68钢中形成均匀分布的氦气气泡和低水平溶胀。与EP-450钢的HTDS光谱相比,EP-450-ODS钢释放的氦气的温度范围要宽得多。在HTDS光谱的主峰之后的高温范围内,ODS钢会释放出大量的氦气。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号