Evaluation of the efficiency of silicone polyether additives as antifoams in crude oil

摘要

It is common for crude oil from wells to be accompanied by gas and water because of the presence of natural surfactants in the oil that stabilize the associated water. This causes foaming during processing in gas/oil separators because of the constant agitation and shear forces, which reduce the efficiency of the process and require chemical control by the addition of defoaming additives, or antifoams. In this work, we evaluated the chemical and physicochemical properties of commercial antifoam products based on silicone polyethers along with their efficiency in inhibiting foaming and water/oil (W/O) phase separation. The commercial surfactants were characterized by NMR spectroscopy, size exclusion chromatography, determination of solubility in different solvents, and measurement of the surface and interfacial tensions. A method to test the formation of foam in oil was used to mimic the operating conditions in gas/oil separators. Finally, tests were performed with the addition of aliquots of the additive solutions (30% p/v) in oil to evaluate their efficiency in breaking up the foam under different conditions. The results show that the most polar additive (SL2) was the most efficient in breaking up the foam. Additive SP1, which formed a heterogeneous phase in the oil, was also an efficient foam inhibitor and helped to separate these phases. The antifoam tests showed that these additives did not stabilize W/O emulsions, so they could be used in gravitational separation tanks in the field.