Preparation and characterization of nanoparticle-filled, mixed-matrix membranes for the pervaporation dehydration of isopropyl alcohol

摘要

Novel polymeric mixed-matrix membranes (MMMs) were prepared by the incorporation of different amounts of 13X zeolite into a sodium carboxymethylcellulose (NaCMC)/poly(vinyl alcohol) (PVA) blend matrix. The resulting MMMs were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy to analyze the possible chemical reactions between NaCMC, PVA, zeolites, and glutaraldehyde. Scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction were used to analyze the surface morphology, thermal stability, and crystallinity, respectively, of the membranes. Swellings studies were performed at 35°C, and we found that membranes containing 20 wt % zeolite showed higher values (960 kg m ~(-2) h ~(-1)) at 17.5 wt % water in an isopropyl alcohol (IPA)/water mixture. Pervaporation (PV) experiments were also performed to evaluate the membrane performance in different compositions of the IPA/water mixture at 35°C. The mechanical properties were also tested, and we found that the optimum mechanical strength and percentage elongation at break were 42.24 N/mm ~2 and 3.38, respectively, for the membrane containing 15 wt % zeolite. The experimental results show that both the flux and selectivity increased with increasing zeolite content. The membrane containing 20 wt % zeolite showed the highest separation selectivity (5118) with a substantial flux of 0.121 kg m ~(-2) h ~(-1) at 35°C and with 10 wt % water in the feed; this suggested that the membranes could be used effectively to break the azeotropic point of the water-IPA mixture, so as to remove a small amount of water from IPA.