首页> 外文期刊>Journal of Applied Polymer Science >Oil-Resistance Studies of Dynamically Vulcanized Poly(vinyl chloride)/Epoxidized Natural Rubber Thermoplastic Elastomer
【24h】

Oil-Resistance Studies of Dynamically Vulcanized Poly(vinyl chloride)/Epoxidized Natural Rubber Thermoplastic Elastomer

机译:动态硫化聚氯乙烯/环氧天然橡胶热塑性弹性体的耐油性研究

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Dynamically vulcanized poly(vinyl chloride)/epoxidized natural rubber(PVC/ENR) thermoplastic elastomers(TPEs)were prepared with a Brabender plasticorder coupled with a mixing attachment by melt mixing.The blends were prepared at 150 deg C at a rotor speed of 50 rpm.Curatives concentration was steadily increased from 0 to 1 phr in order to study the vulcanization effect on the plasticized blend.The effectiveness of the dynamic vulcanization was indicated by the Bradender plastograms.The properties investigated include mass swell,tensile strength,elongation at break,modulus at 100% elongation (M100), tear strength, and hardness.The PVC/ENR samples were exposed to twotypes of environments,namely,air and oil under otherwise identical conditions.The effect of oil and thermooxidative aging on the mechanical properties were characterized at room temperature and 100 deg C .It was found that at ambient temperature the samples immersed in oil possessed similar properties to those that were exposed to air.Significant enhancement in mechanical properties were observed for both environments at 100 deg C.This has been attributed to the increase in crosslink dnsity which was manifested by a steady reduction in percent mass swell with increased sulfur loading.The excellent mechanical behavior of the PVC/ENR TPEs even after immersing the samples in oil at 100 deg C has provided a good indication of the oil resistance of the materials.
机译:用Brabender塑胶订单通过熔融混合将动态硫化的聚氯乙烯/环氧天然橡胶(PVC / ENR)热塑性弹性体(TPE)与混合附件结合在一起,然后在150摄氏度,转子转速50的条件下制备共混物为了研究对塑化共混物的硫化效果,硫化剂的浓度从0 phr稳定地增加到1 phr。动态硫化的有效性由Bradender塑形图表示。所研究的性质包括质量膨胀,拉伸强度,断裂伸长率,在100%伸长率下的模量(M100),撕裂强度和硬度.PVC / ENR样品在其他相同条件下暴露于两种类型的环境,即空气和油中。油和热氧化老化对机械性能的影响为在室温和100摄氏度下进行表征。发现在环境温度下,浸入油中的样品具有与暴露样品相似的特性。在100°C两种环境下均观察到机械性能的显着增强,这归因于交联密度的增加,这表现为质量膨胀百分数的稳定降低以及硫含量的增加。即使将样品浸入100摄氏度的油中,PVC / ENR TPE仍能很好地表明材料的耐油性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号