首页> 外文期刊>Talanta: The International Journal of Pure and Applied Analytical Chemistry >Automated determinations of selenium in thermal power plant wastewater by sequential hydride generation and chemiluminescence detection
【24h】

Automated determinations of selenium in thermal power plant wastewater by sequential hydride generation and chemiluminescence detection

机译:连续氢化物发生和化学发光检测自动测定火电厂废水中的硒

获取原文
获取原文并翻译 | 示例
           

摘要

After the Fukushima disaster, power generation from nuclear power plants in Japan was completely stopped and old coal-based power plants were re-commissioned to compensate for the decrease in power generation capacity. Although coal is a relatively inexpensive fuel for power generation, it contains high levels (mg kg(-1)) of selenium, which could contaminate the wastewater from thermal power plants. In this work, an automated selenium monitoring system was developed based on sequential hydride generation and chemiluminescence detection. This method could be applied to control of wastewater contamination. In this method, selenium is vaporized as H2Se, which reacts with ozone to produce chemiluminescence. However, interference from arsenic is of concern because the ozone-induced chemiluminescence intensity of H2Se is much lower than that of AsH3. This problem was successfully addressed by vaporizing arsenic and selenium individually in a sequential procedure using a syringe pump equipped with an eight-port selection valve and hot and cold reactors. Oxidative decomposition of organoselenium compounds and pre-reduction of the selenium were performed in the hot reactor, and vapor generation of arsenic and selenium were performed separately in the cold reactor. Sample transfers between the reactors were carried out by a pneumatic air operation by switching with three-way solenoid valves. The detection limit for selenium was 0.008 mg L-1 and calibration curve was linear up to 1.0 mg L-1, which provided suitable performance for controlling selenium in wastewater to around the allowable limit (0.1 mg L-1). This system consumes few chemicals and is stable for more than a month without any maintenance. Wastewater samples from thermal power plants were collected, and data obtained by the proposed method were compared with those from batchwise water treatment followed by hydride generation-atomic fluorescence spectrometry. (C) 2015 Elsevier B.V. All rights reserved.
机译:福岛核电站事故发生后,日本的核电站完全停止发电,并对旧的煤基发电厂进行了重新调试,以弥补发电量的下降。尽管煤是用于发电的相对廉价的燃料,但它包含高含量(mg kg(-1))的硒,这可能会污染火力发电厂的废水。在这项工作中,开发了基于连续氢化物生成和化学发光检测的自动硒监测系统。该方法可用于控制废水污染。在这种方法中,硒以H2Se的形式蒸发,并与臭氧反应产生化学发光。然而,砷的干扰是令人关注的,因为臭氧诱导的H2Se化学发光强度远低于AsH3。通过使用配备有八通选择阀和冷热反应器的注射泵,依次进行砷和硒的汽化,成功解决了这一问题。在热反应器中进行有机硒化合物的氧化分解和硒的预还原,在冷反应器中分别进行砷和硒的蒸气产生。反应器之间的样品转移是通过气动操作通过三通电磁阀切换进行的。硒的检出限为0.008 mg L-1,校正曲线线性至1.0 mg L-1,为将废水中的硒控制在允许的限值(0.1 mg L-1)附近提供了合适的性能。该系统消耗的化学药品很少,并且无需任何维护即可稳定超过一个月。收集了来自火电厂的废水样品,并将通过该方法获得的数据与间歇水处理后氢化物发生-原子荧光光谱法的数据进行了比较。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号