...
首页> 外文期刊>Physics of plasmas >Generation of heavy ion beams using femtosecond laser pulses in the target normal sheath acceleration and radiation pressure acceleration regimes
【24h】

Generation of heavy ion beams using femtosecond laser pulses in the target normal sheath acceleration and radiation pressure acceleration regimes

机译:使用飞秒激光脉冲在目标法向护套加速和辐射压力加速状态下产生重离子束

获取原文
获取原文并翻译 | 示例
           

摘要

Theoretical study of heavy ion acceleration from sub-micron gold foils irradiated by a short pulse laser is presented. Using two dimensional particle-in-cell simulations, the time history of the laser pulse is examined in order to get insight into the laser energy deposition and ion acceleration process. For laser pulses with intensity 3 x 10(21) W/cm(2), duration 32 fs, focal spot size 5 mu m, and energy 27 J, the calculated reflection, transmission, and coupling coefficients from a 20 nm foil are 80%, 5%, and 15%, respectively. The conversion efficiency into gold ions is 8%. Two highly collimated counter-propagating ion beams have been identified. The forward accelerated gold ions have average and maximum charge-to-mass ratio of 0.25 and 0.3, respectively, maximum normalized energy 25MeVucleon, and flux 2 x 10(11) ions/sr. An analytical model was used to determine a range of foil thicknesses suitable for acceleration of gold ions in the radiation pressure acceleration regime and the onset of the target normal sheath acceleration regime. The numerical simulations and analytical model point to at least four technical challenges hindering the heavy ion acceleration: low charge-to-mass ratio, limited number of ions amenable to acceleration, delayed acceleration, and high reflectivity of the plasma. Finally, a regime suitable for heavy ion acceleration has been identified in an alternative approach by analyzing the energy absorption and distribution among participating species and scaling of conversion efficiency, maximum energy, and flux with laser intensity. Published by AIP Publishing.
机译:提出了短脉冲激光对亚微米金箔重离子加速的理论研究。使用二维单元中粒子模拟,可以检查激光脉冲的时间历史,以便深入了解激光能量沉积和离子加速过程。对于强度为3 x 10(21)W / cm(2),持续时间为32 fs,焦点尺寸为5μm,能量为27 J的激光脉冲,从20 nm箔片计算出的反射,透射和耦合系数为80分别为%,5%和15%。转化为金离子的效率为8%。已经确定了两个高度准直的反向传播离子束。向前加速的金离子的平均和最大荷质比分别为0.25和0.3,最大归一化能量为25MeV /核子,通量为2 x 10(11)离子/ sr。使用分析模型来确定适合在辐射压力加速方案和目标正常鞘层加速方案开始时金离子加速的箔厚度范围。数值模拟和分析模型指出了至少四个阻碍重离子加速的技术挑战:低的质荷比,可加速的离子数量有限,加速的延迟以及等离子体的高反射率。最后,通过分析参与物种之间的能量吸收和分布以及转换效率,最大能量和激光强度的通量,通过替代方法确定了一种适合重离子加速的方案。由AIP Publishing发布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号