首页> 外文期刊>Optics Letters >Accurate optical vector network analyzer based on optical single-sideband modulation and balanced photodetection
【24h】

Accurate optical vector network analyzer based on optical single-sideband modulation and balanced photodetection

机译:基于光学单边带调制和平衡光电检测的精确光学矢量网络分析仪

获取原文
获取原文并翻译 | 示例
           

摘要

A novel optical vector network analyzer (OVNA) based on optical single-sideband (OSSB) modulation and balanced photodetection is proposed and experimentally demonstrated, which can eliminate the measurement error induced by the high-order sidebands in the OSSB signal. According to the analytical model of the conventional OSSB-based OVNA, if the optical carrier in the OSSB signal is fully suppressed, the measurement result is exactly the high-order-sideband-induced measurement error. By splitting the OSSB signal after the optical device-under-test (ODUT) into two paths, removing the optical carrier in one path, and then detecting the two signals in the two paths using a balanced photodetector (BPD), high-order-sideband-induced measurement error can be ideally eliminated. As a result, accurate responses of the ODUT can be achieved without complex post-signal processing. A proof-of-concept experiment is carried out. The magnitude and phase responses of a fiber Bragg grating (FBG) measured by the proposed OVNA with different modulation indices are superimposed, showing that the high-order-sideband-induced measurement error is effectively removed. (C) 2015 Optical Society of America
机译:提出并实验证明了一种基于光单边带(OSSB)调制和平衡光检测的新型光矢量网络分析仪(OVNA),可以消除OSSB信号中高阶边带引起的测量误差。根据传统的基于OSSB的OVNA的分析模型,如果OSSB信号中的光载波被完全抑制,则测量结果恰好是高阶边带引起的测量误差。通过将被测光学设备(ODUT)之后的OSSB信号分成两条路径,移除一条路径中的光载波,然后使用平衡光电检测器(BPD)(高阶)检测两条路径中的两个信号可以理想地消除边带引起的测量误差。结果,无需复杂的后信号处理就可以实现ODUT的准确响应。进行了概念验证实验。所提出的具有不同调制指数的OVNA对光纤布拉格光栅(FBG)的幅值和相位响应进行了叠加,表明有效消除了高阶边带引起的测量误差。 (C)2015年美国眼镜学会

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号