首页> 外文期刊>Macromolecules >Synthesis of poly(propene-g-styrene) graft copolymers by metallocene catalyzed copolymerization of propene with allyl-terminated polystyrene macromonomer obtained via quasiliving atom transfer radical polymerization and the effect of the grafts on bl
【24h】

Synthesis of poly(propene-g-styrene) graft copolymers by metallocene catalyzed copolymerization of propene with allyl-terminated polystyrene macromonomer obtained via quasiliving atom transfer radical polymerization and the effect of the grafts on bl

机译:茂金属催化丙烯与丙烯基封端的聚苯乙烯大分子单体的准茂原子转移自由基聚合制得的聚丙烯(丙烯-g-苯乙烯)接枝共聚物及其对bl的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Allyl-terminated polystyrenes (PS macromonomers) were synthesized by quasiliving atom transfer radical polymerization (ATRP) of styrene followed by carbocationic chain end transformation with allyltrimethylsilane in the presence of titanium tetrachloride. Systematic investigations were carried out on metallocene/MAO-catalyzed copolymerization of PS macromonomers with propene by varying the molecular weight of the macromonomer, the type of catalyst, the polymerization temperature, and the propene pressure. The resulting poly(propene-g-styrene)(PP-g-PS) graft copolymers were analyzed by H-1 and C-13 NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry. Macromonomer incorporation, molecular weight, tacticity, and crystallinity of the resulting PP-g-PS copolymers were greatly influenced by the investigated parameters. The macromonomer incorporation depends mostly on the polymerization temperature. The highest comonomer incorporation (10.8 wt %) was achieved at the highest polymerization temperature, but at the same time the molecular weight decreases strongly with increasing polymerization temperature leading to graft copolymers with relatively low molecular weights. For the first time, the effect of well-defined PP-g-PS grafts was investigated on blending incompatible polypropylene with polystyrene. Surprisingly, it was found that PP-g-PS; graft copolymers with short PS side chains show a better compatibilization efficiency than those with long PS chains at comparable composition as scanning electron microscopic investigations on the morphology of blends indicate. [References: 20]
机译:通过使苯乙烯准原子转移自由基聚合(ATRP),然后在四氯化钛存在下用烯丙基三甲基硅烷进行碳阳离子链末端转化,来合成烯丙基封端的聚苯乙烯(PS大分子单体)。通过改变大分子单体的分子量,催化剂类型,聚合温度和丙烯压力,对茂金属/ MAO催化PS大分子单体与丙烯的共聚进行了系统研究。通过H-1和C-13 NMR光谱,凝胶渗透色谱和差示扫描量热法分析所得的聚(丙烯-g-苯乙烯)(PP-g-PS)接枝共聚物。所得PP-g-PS共聚物的大分子单体掺入,分子量,立构规整​​度和结晶度受研究参数的影响很大。大分子单体的掺入主要取决于聚合温度。在最高聚合温度下实现了最高的共聚单体掺入量(10.8 wt%),但是同时分子量随着聚合温度的升高而大大降低,从而导致接枝共聚物的分子量相对较低。首次研究了定义明确的PP-g-PS接枝对不相容聚丙烯与聚苯乙烯共混的影响。令人惊讶的是,发现了PP-g-PS。扫描电镜对共混物形态的研究表明,具有短PS侧链的接枝共聚物在可比的组成下比具有长PS侧链的共聚物具有更好的相容性。 [参考:20]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号