首页> 外文期刊>Analytical chemistry >Semihydrodynamic Injection for High Salt Stacking and Sweeping on Microchip Electrophoresis and Its Application for the Analysis of Estrogen and Estrogen Binding
【24h】

Semihydrodynamic Injection for High Salt Stacking and Sweeping on Microchip Electrophoresis and Its Application for the Analysis of Estrogen and Estrogen Binding

机译:半流体动力进样在微芯片电泳上高盐堆积扫掠及其在雌激素和雌激素结合分析中的应用

获取原文
获取原文并翻译 | 示例
           

摘要

In this work, a semihydrodynamic (SHD) injection method was introduced and coupled with high salt stacking and electrokinetic chromatography for the analysis of estrogen and estrogen binding using a simple cross microchannel. The SHD method allows all samples to be hydrodynamically injected and focused into the separation channel at a relatively high flow rate and without splitting and diffusion, leading to reproducible bias-free injections of larger sample volumes (up to 50 nL) within 3 s. Moreover, the injection method is initiated without voltage switching, leading to a reduced mixing effect. Such advantages are well suited for performing stacking and sweeping on a microchip. We investigated the stacking effect under continuous and discontinuous co-ion conditions as well as under sweeping conditions. Micellar sweeping effect alone was relatively weak (7-8 times), partly due to a lower sodium cholate concentration (30 mM) used for the running buffer. By combining the sweeping effect with high salt stacking, however, up to a 200-300-fold enhancement factor could be achieved, and the high-salt and low-surfactant contents for the running buffer were favorable for binding study under nonequilibrium conditions. To the best of our knowledge, this is the first demonstration of the hydrodynamic injection used for high salt sample stacking on a microchip, also for further combining micellar electrochromatography and affinity separation for the analysis of hydrophobic ligand binding using microchip electrophoresis.
机译:在这项工作中,引入了半流体动力学(SHD)注射方法,并与高盐堆积和电动色谱法结合使用简单的交叉微通道分析雌激素和雌激素结合。 SHD方法允许将所有样品以流体动力学方式注入并以相对较高的流速聚焦到分离通道中,而不会分裂和扩散,从而可在3 s内重现无偏大体积样品(最大50 nL)的进样。此外,在没有电压切换的情况下启动注入方法,从而导致混合效果降低。这些优点非常适合在微芯片上执行堆叠和清扫。我们研究了在连续和不连续的co-ion条件下以及在清扫条件下的堆积效果。仅胶束清扫效果相对较弱(7-8倍),部分原因是用于运行缓冲液的胆酸钠浓度较低(30 mM)。通过将清扫效果与高盐堆积量相结合,可实现高达200-300倍的增强因子,并且运行缓冲液中高盐和低表面活性剂的含量有利于非平衡条件下的结合研究。据我们所知,这是流体动力学注射的首次演示,该流体动力学注射用于将高盐样品堆叠在微芯片上,还用于进一步结合胶束电色谱和亲和分离,以使用微芯片电泳分析疏水性配体结合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号