...
首页> 外文期刊>Contributions to Plasma Physics >The Large Hadron Collider and the Super Proton Synchrotron at CERN as Tools to Generate Warm Dense Matter and Non-Ideal Plasmas
【24h】

The Large Hadron Collider and the Super Proton Synchrotron at CERN as Tools to Generate Warm Dense Matter and Non-Ideal Plasmas

机译:欧洲核子研究中心的大型强子对撞机和超质子同步加速器,作为产生热密物质和非理想等离子体的工具

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The largest accelerator in the world, the Large Hadron Collider (LHC) at CERN, has entered into commissioning phase. It is expected that when this impressive machine will become fully operational, it will generate two counter rotating 7 TeV/c proton beams that will be made to collide, leading to an unprecedented luminosity of 10~(34) cm~(?2)s~(?1). Total energy stored in each LHC beam is about 362 MJ, sufficient to melt 500 kg copper. Safety of operation is a very critical issue when working with such extremely powerful beams. It is important to know the consequences of an accidental release of the beam energy in order to design protection system for the equipment. For this purpose we have carried out extensive numerical simulations of the interaction of one full LHC beam with copper and graphite targets which are materials of practical importance. Our calculations have shown that the LHC protons will penetrate up to about 35 m in solid copper and 10 m in solid graphite. A very interesting outcome of this work is that the impact of the LHC beam on solid matter will generate Warm Dense Matter (WDM) and Strongly Coupled Plasmas (SCP). The beams for the LHC are pre-accelerated in the SPS (Super Proton Synchrotron) to 450 GeV/c and transferred to LHC via two beam lines. Several SPS cycles are required to fill the LHC, in one cycle a batch with up to 288 bunches can be accelerated. From the safety point of view it is also very important to study the damage caused to the equipment in case of an accident involving an uncontrolled release of the SPS beam. For this purpose we have also carried out detailed numerical simulations of the impact of the full SPS beam on solid copper and tungsten targets. These simulations have shown that the targets are severely damaged by the beam. It is also interesting to note that also in this case, a large part of the target material is converted into WDM and SCP. This study, therefore, shows that the LHC and the SPS have the potential to be used for studying these important fields of research. However, to achieve this goal, it is necessary to advance this work by designing dedicated experiments. This work is in progress.
机译:CERN的大型强子对撞机(LHC)是世界上最大的加速器,现已进入调试阶段。预计当这台令人印象深刻的机器完全投入运行时,它将产生两个反向旋转的7 TeV / c质子束,它们会发生碰撞,从而产生前所未有的10〜(34)cm〜(?2)s的光度。 〜(?1)。每个LHC光束中存储的总能量约为362 MJ,足以熔化500千克铜。当使用如此强大的光束工作时,操作安全是一个非常关键的问题。重要的是要知道意外释放光束能量的后果,以便为设备设计保护系统。为此,我们对一根完整的LHC光束与具有实际重要性的材料的铜和石墨靶的相互作用进行了广泛的数值模拟。我们的计算表明,LHC质子在固体铜中的穿透深度约为35 m,在固体石墨中的穿透深度约为10 m。这项工作的一个非常有趣的结果是,LHC光束对固体物质的影响将产生热致密物质(WDM)和强耦合等离子体(SCP)。用于LHC的光束在SPS(超级质子同步加速器)中被预加速到450 GeV / c,并通过两条光束线传输到LHC。填充大型强子对撞机需要几个SPS周期,一个周期可以加速多达288束的批量。从安全角度出发,研究在意外控制SPS光束释放事故中对设备造成的损坏也很重要。为此,我们还对完整的SPS光束对固态铜和钨靶的影响进行了详细的数值模拟。这些模拟表明,光束严重破坏了目标。有趣的是,在这种情况下,目标材料的很大一部分也转换为WDM和SCP。因此,这项研究表明,大型强子对撞机和SPS具有潜力用于研究这些重要的研究领域。但是,为了实现此目标,有必要通过设计专用实验来推进这项工作。这项工作正在进行中。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号