...
首页> 外文期刊>Biomacromolecules >Development of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibers for Skin Tissue Engineering: Effects of Topography, Mechanical and Chemical Stimuli
【24h】

Development of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibers for Skin Tissue Engineering: Effects of Topography, Mechanical and Chemical Stimuli

机译:皮肤组织工程用聚(3-羟基丁酸酯-co-3-羟基戊酸酯)纤维的开发:地形,机械和化学刺激的影响。

获取原文
获取原文并翻译 | 示例

摘要

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biodegradable polyester, was electrospun to form defect-free fibers with high surface-area-to-volume ratio for skin regeneration. Several parameters such as solvent ratio, polymer concentration, applied voltage, flow rate, and tip-to-target distance were optimized to achieve defect-free morphology. The average diameter of the PHBV fibers was 724 ± 91 nm. PHBV was also solvent-cast to form 2-D films, and its mechanical properties, porosity, and degradation rates were compared with PHBV fibers. Our results demonstrate that PHBV fibers exhibited higher porosity, increased ductility, and faster degradation rate when compared with PHBV 2-D films (p < 0.05). In vitro studies with PHBV fibers and 2-D films were carried out to evaluate the adhesion, viability, proliferation, and gene expression of human skin fibroblasts. Cells adhered and proliferated on both PHBV fibers and 2-D films. However, the proliferation of cells on the surface of PHBV fibers was comparable to tissue culture polystyrene (TCPS, control) (p > 0.05). The gene expression of collagen I and elastin was significantly up-regulated when compared with TCPS control, whereas collagen III was down-regulated on PHBV fibers and 2-D film after 14 days in culture. The less ductile PHBV 2-D films showed higher levels of elastin expression. Furthermore, the PHBV fibers in the presence and absence of an angiogenesis factor (R-Spondin 1) were evaluated for their wound healing capacity in a rat model. The wound contracture in R-Spondin-1-loaded PHBV fibers was found to be significantly higher when compared with PHBV fibers alone after 7 days (p < 0.05). Furthermore, the presence of fibers promoted an increase in collagen and aided re-epifhelialization. Thus our results demonstrate that the topography and mechanical and chemical stimuli have a pronounced influence on the cell proliferation, gene expression, and wound healing.
机译:对可生物降解的聚酯聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)进行电纺丝,以形成具有高表面积/体积比的无缺陷纤维,用于皮肤再生。优化了几个参数,例如溶剂比率,聚合物浓度,施加电压,流速和针尖到目标的距离,以实现无缺陷的形态。 PHBV纤维的平均直径为724±91 nm。还对PHBV进行溶剂浇铸以形成二维薄膜,并将其机械性能,孔隙率和降解率与PHBV纤维进行了比较。我们的结果表明,与PHBV 2-D薄膜相比,PHBV纤维显示出更高的孔隙率,更高的延展性和更快的降解速率(p <0.05)。用PHBV纤维和2-D膜进行了体外研究,以评估人皮肤成纤维细胞的粘附性,生存力,增殖和基因表达。细胞在PHBV纤维和2-D膜上均粘附并增殖。但是,PHBV纤维表面细胞的增殖与组织培养聚苯乙烯(TCPS,对照)相当(p> 0.05)。与TCPS对照相比,胶原蛋白I和弹性蛋白的基因表达显着上调,而培养14天后,PHBV纤维和二维膜上的胶原蛋白III则下调。延展性较弱的PHBV 2-D膜显示出更高水平的弹性蛋白表达。此外,在大鼠模型中评估了在有和没有血管生成因子(R-Spondin 1)存在下的PHBV纤维的伤口愈合能力。 7天后,与单独使用PHBV纤维相比,发现加载R-Spondin-1的PHBV纤维的伤口挛缩明显更高(p <0.05)。此外,纤维的存在促进了胶原蛋白的增加并有助于再上皮化。因此,我们的结果表明,地形以及机械和化学刺激对细胞增殖,基因表达和伤口愈合具有显着影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号