...
首页> 外文期刊>鉄と鋼/Journal of the Iron and Steel Institute of Japan. >Outdoor Exposure Test on Prepainted 55 percent Al-Zn Coated Steel Sheet Subjected in 15-year
【24h】

Outdoor Exposure Test on Prepainted 55 percent Al-Zn Coated Steel Sheet Subjected in 15-year

机译:15年内进行55%Al-Zn涂层的预涂钢板的室外暴露测试

获取原文
获取原文并翻译 | 示例
           

摘要

We carried out a 15-year outdoor exposure test to investigate the corrosion behavior of prepainted 55 percent Al-Zn coated steel sheet in comparison with prepainted galvanized steel sheet. The edge creep of prepainted 55 percent Al-Zn coated steel sheet is larger than that of prepainted galvanized steel sheet in the early stages of the exposure test. However, the progress of edge creep of prepainted 55 percent Al-Zn coated steel sheet slows down year after year then stopps, while that of prepainted galvanized steel sheet remains almost constant. The edge creep widths of both sheets were almost the same at 6 to 8 years. After that point, the edge creep width of prepainted 55 percent Al-Zn coated steel sheet was smaller than that of prepainted galvanized steel sheet. Also, the scribed part and T-bend part of prepainted 55 percent Al-Zn coated steel sheet shows better corrosion resistance than those of prepainted galvanized steel sheet. The effect of pretreatment and primer on the corrosion of prepainted 55 percent Al-Zn coated steel sheet was not clearly noticed.
机译:我们进行了一个为期15年的室外暴露测试,以研究55%Al-Zn涂层的预涂钢板与预涂镀锌钢板的腐蚀行为。在暴露测试的早期阶段,预涂55%的Al-Zn涂层钢板的边缘蠕变大于预涂镀锌钢板的边缘蠕变。但是,预涂55%的Al-Zn涂层钢板的边缘蠕变的速度逐年减慢,然后逐渐下降,而预涂镀锌钢板的边缘蠕变的速度几乎保持不变。这两张纸的边缘蠕变宽度在6至8年内几乎相同。此后,预涂55%的Al-Zn涂层钢板的边缘蠕变宽度小于预涂镀锌钢板的边缘蠕变宽度。而且,预涂55%Al-Zn涂层钢板的划刻部分和T形弯曲部分显示出比预涂镀锌钢板更好的耐腐蚀性。没有清楚地注意到预处理和底漆对预涂55%Al-Zn涂层钢板的腐蚀的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号