...
首页> 外文期刊>Colloids and Surfaces, B. Biointerfaces >Non-specific and specific interactions on functionalized polymer surface studied by FT-SPR
【24h】

Non-specific and specific interactions on functionalized polymer surface studied by FT-SPR

机译:FT-SPR研究功能化聚合物表面上的非特异性和特异性相互作用

获取原文
获取原文并翻译 | 示例

摘要

Fourier transform surface plasmon resonance (FT-SPR) was utilized to study specific and non-specific interactions between proteins and a biotinylated polymer film by monitoring adsorptions of streptavidin (SAv) and bovine serum albumin (BSA) on the polymer films. The biotinylated polymer, poly(lactide- co-2,2-dihydroxymethyl-propylene carbonate- graft-biotin) [P(LA- co-DHC/biotin)], was prepared by ring-opening copolymerization of lactide and a OH-bearing cyclic carbonate monomer, followed by biotinylation of the OH groups. The copolymer was coated onto the FT-SPR chip and vacuum-dried, hydrated at 70 °C, and treated with a blocking agent respectively to achieve different surface status. The FT-SPR results showed that the vacuum-dried film had the most BSA adsorption; hydration treatment led to migration of the biotin moieties from inner film to surface and thus resulted in less BSA adsorption; blocking layer on the polymer surface saturated the active sites for physical and chemical adsorptions on the surface and thus weakened the BSA adsorption. Adsorption of SAv displayed similar polymer-surface-status dependence, i.e., more adsorption on vacuum-dried surface, less adsorption on hydrated surface and the least adsorption on blocked surface. Compared with BSA, SAv showed more enhanced adsorptions on P(LA- co-DHC/biotin) surface because of the specific interaction of biotin moieties in the polymer with SAv molecules, especially on the blocked surface. The above semi-quantified results further indicate that the FT-SPR system is suitable for investigating interactions between polymer surface and bio-molecules.
机译:傅里叶变换表面等离子体激元共振(FT-SPR)用于通过监测链霉亲和素(SAv)和牛血清白蛋白(BSA)在聚合物膜上的吸附来研究蛋白质与生物素化聚合物膜之间的特异性和非特异性相互作用。生物素化的聚合物,聚丙交酯-co-2,2-二羟甲基-碳酸亚丙酯-接枝生物素[P(LA-co-DHC /生物素)],是通过丙交酯和含羟基的开环共聚反应制备的环状碳酸酯单体,然后对羟基进行生物素化。将该共聚物涂覆到FT-SPR芯片上,真空干燥,在70°C下水合,并分别用封闭剂处理,以达到不同的表面状态。 FT-SPR结果表明,真空干燥膜对BSA的吸附最大。水合处理导致生物素部分从内膜迁移到表面,从而导致较少的BSA吸附;聚合物表面上的阻挡层使表面上物理和化学吸附的活性位饱和,从而削弱了BSA的吸附。 SAv的吸附表现出相似的聚合物-表面状态依赖性,即在真空干燥的表面上吸附更多,在水合的表面上吸附较少,在封闭的表面上吸附最少。与BSA相比,SAv在P(LA-co-DHC /生物素)表面显示出更多的吸附,这是因为聚合物中生物素部分与SAv分子,特别是在受阻表面上的特异性相互作用。上述半定量结果进一步表明,FT-SPR系统适用于研究聚合物表面与生物分子之间的相互作用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号