首页> 外文期刊>電子情報通信学会技術研究報告. 無線通信システム. Radio Communication Systems >Fast Packet Scheduling Method Considering QoS Requirements and Channel Conditions in Forward Link Broadband Wireless Acces
【24h】

Fast Packet Scheduling Method Considering QoS Requirements and Channel Conditions in Forward Link Broadband Wireless Acces

机译:前向链路宽带无线接入中考虑QoS要求和信道条件的快速分组调度方法

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

This paper proposes a unified packet scheduling method that considers the delay requirement of each traffic data packet whether real time (RT) or non-real time (NRT), the channel conditions of each accessing user, and the packet type in hybrid automatic repeat request (ARQ), i.e., either initially transmitted packet or retransmitted packet, in the forward link for Orthogonal Frequency and Code Division Multiplexing (OFCDM) wireless access. In the proposed packet scheduling method, the overall priority function is decided based on P{sub}(total) = α{sub}(Delay) p{sub}(Delay) + α{sub}(Type)P{sub}(Type) + α{sub}(SIR) P{sub}(SIR) (P{sub}(Delay), P{sub}(Type), and p{sub}(SIR) are the priority function derived from the delay requirement, type of packet, and the received SIR, respectively, and α{sub}(Delay) α{sub}(Type), and α{sub}(SIR) are the corresponding weighting factors). We optimize the weighting factors of three criteria as T{sub}(pri) = 144 TTI (Transmission Time Interval), α{sub}(Delay) = 1, α{sub}(Type) = 0,5, and α{sub}(SIR) = 0.5 by computer simulation. Simulation results also elucidate that the outage probability for achieving the packet loss rate (PLR) below 10{sup}(-4) for NRT traffic users employing the proposed packet scheduling method can be reduced by more than two orders of magnitude compared to that using the Priority Queuing (PQ) method, while maintaining the PLR of RT traffic users at the same level as that using the PQ method.
机译:本文提出了一种统一的分组调度方法,该方法考虑了每个业务数据分组的延迟要求,无论是实时(RT)还是非实时(NRT),每个访问用户的信道条件以及混合自动重发请求中的分组类型(ARQ),即在正交频率和码分复用(OFCDM)无线访问的前向链路中的初始传输的数据包或重新传输的数据包。在提出的分组调度方法中,基于P {sub}(total)=α{sub}(Delay)p {sub}(Delay)+α{sub}(Type)P {sub}(类型)+α{sub}(SIR)P {sub}(SIR)(P {sub}(Delay),P {sub}(Type)和p {sub}(SIR)是根据延迟得出的优先级函数需求,数据包类型和接收到的SIR,α{sub}(Delay)α{sub}(Type)和α{sub}(SIR)是相应的加权因子。我们优化了三个标准的权重因子,分别为T {sub}(pri)= 144 TTI(传输时间间隔),α{sub}(延迟)= 1,α{sub}(类型)= 0.5和α{ sub}(SIR)= 0.5(通过计算机仿真)。仿真结果还表明,与使用NRT流量调度方法的NRT流量用户相比,NRT流量用户达到10 {sup}(-4)以下的丢包率(PLR)的中断概率可以降低两个以上数量级。优先排队(PQ)方法,同时将RT流量用户的PLR保持在与使用PQ方法相同的级别上。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号