...
首页> 外文期刊>Journal of Ceramic Processing Research. (Text in English) >Properties of nano-hybrid sol-gel coating films synthesized with colloidal silica and organoalkoxy silanes
【24h】

Properties of nano-hybrid sol-gel coating films synthesized with colloidal silica and organoalkoxy silanes

机译:胶体二氧化硅和有机烷氧基硅烷合成纳米混合溶胶-凝胶涂膜的性能

获取原文
获取原文并翻译 | 示例
           

摘要

Colloidal silica(CS)-silane sols were synthesized as a dispersion medium of dispersoid,ceramic powders.Functionalizing silanes for nano-hybrid sols were methyltrimethoxysilane(MTMS)and gamma-glycidoxypropyltrimethoxysilane(GEMS).GTMS was added to sols in different amounts.The stability of the sol was evaluated as a function of reaction time up to 10 days through the variation of the viscosity and the transmittance.The viscosity of the sols increased only slightly with reaction time before 10 days.When the sols were reacted for 10 days,the viscosity increased and the transmittance decreased markedly,as well.The coating films were formed on a glass substrate using a spin coating procedure.The coating films were flat and transparent without cracks.Also,the properties of the coating films such as contact angle,roughness,and thermal property were characterized.The CS/MTMS coating films showed a large contact angle.When a large amount of GTMS was added,the contact angle decreased due to the epoxy group.The roughness of the coating films was found to be very low,less than 20 nm.However the roughness of the coating films reacted for 10 days increased due to degradation of the stability of the sol.No thermal degradation of the CS/MTMS coating film occurred up to 600 °C.The CS/MTMS/GTMS coating films degraded at 400 °C due to decomposition of the epoxy group which has a long organic chain easily degraded by the thermal shock.
机译:合成了胶态二氧化硅(CS)-硅烷溶胶作为分散体,陶瓷粉末的分散介质,用于纳米杂化溶胶的功能化硅烷为甲基三甲氧基硅烷(MTMS)和γ-环氧丙氧基丙基三甲氧基硅烷(GEMS).GTMS以不同的量添加到溶胶中。通过改变粘度和透光率来评估溶胶的稳定性与反应时间(长达10天)的关系。溶胶的粘度仅随反应时间的增加而略有增加,直到10天之前。反应10天后,使用旋涂法在玻璃基板上形成涂膜。涂膜平坦且透明,无裂纹。此外,涂膜的性质如接触角,表征了CS / MTMS涂膜的接触角。当加入大量GTMS时,接触角减小了。环氧基。发现涂膜的粗糙度非常低,小于20 nm。但是由于溶胶稳定性的下降,反应了10天的涂膜的粗糙度增加了.CS /没有热降解MTMS涂膜的温度高达600°C.CS / MTMS / GTMS涂膜在400°C时由于环氧基的分解而降解,而环氧基的有机长链很容易因热冲击而降解。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号