首页> 外文期刊>Clinical Orthopaedics and Related Research >In vivo pilot study evaluating the thumb carpometacarpal joint during circumduction
【24h】

In vivo pilot study evaluating the thumb carpometacarpal joint during circumduction

机译:体内先导研究评估环行过程中拇指掌指关节

获取原文
获取原文并翻译 | 示例
       

摘要

Background: Analysis of arthrokinematics may have clinical use in the diagnosis of dynamic instability of the thumb and wrist. Recent technological advances allow noninvasive, high-resolution imaging of skeletal (thumb and carpal bones) structures during motion. Questions/purposes: The primary purpose of this study is to define the arthrokinematics, estimated joint contact patterns, and distribution ratios of the carpometacarpal joint of the thumb using four-dimensional CT (three-dimensional CT + time) and registration algorithms. The second purpose is to validate the accuracy of the approach. Methods: Four-dimensional CT scans were obtained using a nongated sequential scanning technique. Eighteen image volumes were reconstructed over a 2-second cycle during thumb circumduction in one healthy volunteer. Using a registration algorithm, serial thumb motions as well as estimated joint contact areas were quantified. To evaluate the accuracy of our approach, one cadaveric hand was used. Results: During circumduction, the ranges of motion of the thumb carpometacarpal joint were: flexion-extension, 27.3; adduction-abduction, 66.9; and pronation-supination, 10. The magnitude of the translation of the center of the estimated joint contact area of the metacarpal was 4.1, 4.0, 1.0, and 1.5 mm when moving from the initial key pinch position to adduction, adduction to palmar abduction, palmar abduction to opposition, and opposition to the initial key pinch position, respectively. The maximum estimated contact area on the trapezium and on the metacarpal was in palmar abduction; the minimum was in adduction. Dominant central-volar contact patterns were observed on both the trapezium and the metacarpal bone except in adduction. This analysis approach had an average rotational error of less than 1. Conclusions: During circumduction, the estimated joint contact area was concentrated on the central-volar regions of both the trapezium and the metacarpal bones except when the thumb was adducted. Clinical Relevance: This tool provides quantification of estimated joint contact areas throughout joint motion under physiological dynamic loading conditions; this tool may, in future studies, help to clarify some of the ways that joint mechanics might or might not predispose patients to arthritis.
机译:背景:关节运动学分析可能在诊断拇指和腕部动态不稳定性方面具有临床用途。最新的技术进步允许在运动过程中对骨骼(拇指和腕骨)结构进行无创,高分辨率成像。问题/目的:这项研究的主要目的是使用三维CT(三维CT +时间)和配准算法来定义拇指的腕掌关节的关节动力学,估计的关节接触方式和分布比率。第二个目的是验证方法的准确性。方法:使用非门控连续扫描技术获得了二维CT扫描。在一名健康志愿者的拇指包绕过程中,在2秒的周期内重建了18个图像体积。使用配准算法,对连续拇指运动以及估计的关节接触面积进行了量化。为了评估我们方法的准确性,使用了一只尸体手。结果:在包皮环切术中,拇指掌指关节的活动范围为:屈伸27.3;屈伸27.3。内收绑架,66.9; 10.从最初的关键捏位置移至内收,内收转为手掌外展时,掌骨估计关节接触区域中心的平移幅度为4.1、4.0、1.0和1.5 mm,反对派的手掌外展和反对最初的关键捏位置。梯形和掌骨上的最大估计接触面积为手掌外展。最小的是内收。除了内收以外,在梯形和掌骨上均观察到主要的中-骨接触方式。这种分析方法的平均旋转误差小于1。结论:在包绕术中,除了合拢拇指外,估计的关节接触区域集中在梯形和掌骨的中央-中枢区域。临床意义:该工具可在生理动态负荷条件下量化整个关节运动中估计的关节接触面积;在将来的研究中,此工具可能有助于阐明关节力学可能使或不使患者容易患关节炎的某些方式。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号