首页> 外文期刊>Journal of Thermal Spray Technology >In-flight particle measurements of twin wire electric arc sprayed aluminum
【24h】

In-flight particle measurements of twin wire electric arc sprayed aluminum

机译:双线电弧喷涂铝的飞行中粒子测量

获取原文
获取原文并翻译 | 示例
       

摘要

A real-time, nonintrusive measurement technique was successfully applied to a Tafa Model 9000(TAFA Incorporated, Concord, NH) twin wire electric arc thermal spray system to simultaneouslymeasure particle size, velocity, and temperature within the spray plume. Aluminum wire wassprayed with the current varied from 100 to 300 amp, and the gun pressure (air flowrate) varied from40 to 75 psia. For all cases, the average sizes of the molten aluminum particles along the spraycenterline range from 33 to 53μm. The particles accelerate to peak velocities between 130 and 190m/s, then decelerate slightly as they travel downstream. The average centerline particle temperatureranges from 2004 to 2056℃, and the temperature profile remains fairly flat throughout transport tothe substrate. A stagnation pressure probe was used to quantify the gas flow regime in the unladenjet. The wires were found to have a pronounced effect on the flow, resulting in a complex three-dimensional flowfield with mixed regions of subsonic and supersonic flow.
机译:实时,非侵入式测量技术已成功应用于Tafa 9000型(TAFA Incorporated,Concord,NH)双丝电弧热喷涂系统,以同时测量喷涂羽流中的粒径,速度和温度。喷涂铝线时,电流从100到300安培不等,喷枪压力(空气流量)从40到75 psia不等。在所有情况下,熔融铝颗粒沿喷涂中心线的平均尺寸范围为33至53μm。粒子加速到峰值速度在130和190m / s之间,然后在向下游移动时略微减速。中心线的平均温度范围是2004年到2056℃,并且在输送到基板的整个过程中,温度分布保持相当平坦。停滞压力探头用于定量未充气喷气机中的气流状态。发现金属丝对流动有显着影响,从而导致复杂的三维流场,具有亚音速流和超音速流的混合区域。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号