首页> 外文期刊>Journal of Thermal Science and Engineering Applications: Transactions of the ASME >Unsteady Conjugate Heat Transfer Analysis of an Immersed Particle Innovative Heat Exchanger
【24h】

Unsteady Conjugate Heat Transfer Analysis of an Immersed Particle Innovative Heat Exchanger

机译:沉浸式颗粒创新换热器的非稳态共轭传热分析

获取原文
获取原文并翻译 | 示例
       

摘要

The improvement of both heat recovery Joule-Brayton cycles and closed cycle (externally fired) gas turbine plants is strongly limited by the availability of high efficiency heat exchangers. In such a scenario, a no conventional heat exchanger was recently proposed; this device employs falling solid particles to perform heat transfer between two separate gas flows and was designed with a 1D model neglecting conduction within the particles. Although the experimental reliability of this assumption was already obtained for one particle size, there is no proof available of the quantitative effect introduced by the above mentioned simplification and, more importantly, no indication of when this assumption becomes unacceptable. In this work, direct numerical simulation (DNS) of a solid particle immersed in a gas flow has been performed in order to further validate the hypothesis of negligible conduction and to enhance the design of the proposed heat exchanger. Unsteady conjugate heat transfer has been used to predict the final temperature of the solid sphere for Reynolds numbers ranging from 30 to nearly 300, the computational grid being generated with the immersed boundary (IB) technique. A validation of the study is presented, together with grid independence and boundary independence assessment. The results fully confirmed the worthiness of the initial assumption, with a 1.4% maximum error for high Reynolds conditions (large diameter particles) with respect to the 1D model. Additionally, the code has been employed to explore the influence of the wake in the case of aligned particles, namely, the worst possible situation in terms of efficiency of the heat transfer mechanism. Finally, the discrepancy between the results obtained with an axisymmetric domain and a 3D domain, in terms of final temperature of the particle, have been investigated for the highest Reynolds number, when the flow is supposed to lose its axial symmetry.
机译:高效热交换器的可用性极大地限制了热回收焦耳-布雷顿循环和封闭循环(外部燃烧)燃气轮机装置的改进。在这种情况下,最近没有提出传统的热交换器。该设备使用下落的固体颗粒在两个单独的气流之间进行热传递,并设计为一维模型,忽略了颗粒内部的传导。尽管已经针对一种粒径获得了该假设的实验可靠性,但是没有证据表明上述简化所引入的定量效应,更重要的是,没有迹象表明该假设何时变得不可接受。在这项工作中,已经对浸没在气流中的固体颗粒进行了直接数值模拟(DNS),以进一步验证可忽略的传导假设并增强拟议的热交换器的设计。非稳态共轭传热已用于预测雷诺数范围从30到近300的固体球体的最终温度,计算网格是通过沉浸边界(IB)技术生成的。提出了对研究的验证,以及网格独立性和边界独立性评估。结果完全证实了初始假设的价值,对于一维模型,高雷诺条件(大直径粒子)的最大误差为1.4%。另外,该代码已被用于研究在排列的粒子情况下尾流的影响,即就传热机制的效率而言最坏的情况。最后,在假定轴流失去轴向对称性的情况下,对于轴的最高雷诺数,研究了轴对称域和3D域获得的结果之间的差异(以粒子的最终温度为单位)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号