首页> 外文期刊>Journal of the European Ceramic Society >Conductivity and structure features of Ce_(1 - x)Gd_xO_(2 - delta) solid electrolytes fabricated by compaction and sintering of weakly agglomerated nanopowders
【24h】

Conductivity and structure features of Ce_(1 - x)Gd_xO_(2 - delta) solid electrolytes fabricated by compaction and sintering of weakly agglomerated nanopowders

机译:弱团聚纳米粉体的压制和烧结制备的Ce_(1-x)Gd_xO_(2-δ)固体电解质的电导率和结构特征

获取原文
获取原文并翻译 | 示例
           

摘要

The conductivity and structure features of Ce_(1 - x)Gd_xO_(2 - delta) ceramics prepared using weakly agglomerated nanopowders with the average particle size of about of 15 nm are discussed. The powders were synthesized by the evaporation of coarse-grained target with the use of pulsed CO_2-laser radiation. The magnetic pulsed compaction method was applied to press a dry nanopowder to densities up to 55 percent of theoretical one. Owing to high activity of the starting powder and uniformity of the compacts, the sintering of ceramics up to near full density was realized in non-conventionally low temperature range of 1100-1300 deg C. The structure of sintered ceramics with average grain sizes from the range of 100-300 nm was investigated by X-ray analysis and microscopy methods (AFM, SEM). The structure features are discussed in interrelation with the data on conductivity of ceramics. The significant deviation in lattice parameter of elementary cubic cell for sintered fine-grained ceramics as compared with the known data for conventional coarse-grained material was revealed.
机译:讨论了使用平均粒径约为15 nm的弱团聚纳米粉制备的Ce_(1-x)Gd_xO_(2-δ)陶瓷的电导率和结构特征。通过使用脉冲CO_2激光辐射蒸发粗粒靶来合成粉末。电磁脉冲压紧法用于压制干纳米粉,使其密度高达理论值的55%。由于原料粉末的高活性和压块的均匀性,在非常规的1100至1300℃的低温范围内实现了接近全密度的陶瓷烧结。通过X射线分析和显微镜方法(AFM,SEM)研究了100-300 nm的范围。讨论了与陶瓷电导率数据相关的结构特征。揭示了与传统的粗粒材料的已知数据相比,烧结的细粒陶瓷的基本立方晶格的晶格参数存在显着偏差。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号