...
首页> 外文期刊>Journal of Sound and Vibration >Study on the flexural vibration of rectangular thin plates with free boundary conditions
【24h】

Study on the flexural vibration of rectangular thin plates with free boundary conditions

机译:自由边界条件下矩形薄板的弯曲振动研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

An analytical method is presented for the flexural vibration of rectangular thin plates with Free boundary conditions. Based on the apparent elasticity method, the flexural vibration of a rectangular thin plate is reduced to two one-dimensional flexural vibrations of slender rods. Then the two-dimensional flexural vibration of a rectangular thin plate with free boundary conditions is considered as the coupling of these two equivalent flexural vibrations with different equivalent elastic constants. It should be noted that these two equivalent flexural vibrations are different from the traditional one-dimensional flexural vibrations of slender rods. They are coupled to each other by the introduced mechanical coupling coefficient. The analytical solutions for the isotropic rectangular thin plate in flexural vibration are derived and the resonance frequency equation is obtained. The natural vibrational mode is analyzed and the frequency spectra are calculated. It is found that the normal modes and the natural frequencies of the rectangular thin plate in flexural vibration are abundant. Theoretical analysts show that one-dimensional flexural vibration of a slender rod based on the classical elementary flexural theory, as well as the stripe mode vibration of a rectangular thin plate is a limiting vibrational mode of rectangular thin plates. Experiments show that the measured resonance frequencies are in good agreement with the calculated results, and the displacement nodal line pattern is also observed experimentally. (C) 2001 Academic Press. [References: 13]
机译:提出了一种具有自由边界条件的矩形薄板弯曲振动的解析方法。基于表观弹性法,将矩形薄板的弯曲振动减小为细长杆的两个一维弯曲振动。然后将具有自由边界条件的矩形薄板的二维挠曲振动视为具有不同等效弹性常数的这两个等效挠曲振动的耦合。应该注意的是,这两个等效的弯曲振动不同于细长杆的传统一维弯曲振动。它们通过引入的机械耦合系数彼此耦合。推导了各向同性矩形薄板弯曲振动的解析解,得到了共振频率方程。分析固有振动模式并计算频谱。发现矩形薄板在弯曲振动中的法向模态和固有频率丰富。理论分析表明,基于经典基本挠曲理论的细长杆的一维弯曲振动以及矩形薄板的条纹模式振动是矩形薄板的极限振动模式。实验表明,所测得的共振频率与计算结果吻合良好,并且还通过实验观察到了位移节点的线型。 (C)2001学术出版社。 [参考:13]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号