首页> 外文期刊>Chemical Engineering Communications >Corrosion Behavior of 18% Ni M250 Grade Maraging Steel Under Weld-Aged Condition in Sulfuric Acid Medium
【24h】

Corrosion Behavior of 18% Ni M250 Grade Maraging Steel Under Weld-Aged Condition in Sulfuric Acid Medium

机译:18%Ni M250级马氏体时效钢在焊接时效条件下在硫酸介质中的腐蚀行为

获取原文
获取原文并翻译 | 示例
           

摘要

The corrosion behavior of 78% Ni M250 grade maraging steel under weld-aged condition was investigated in sulfuric acid medium of different concentrations (0.1-2 M) at different temperatures (30°-60°C). Electrochemical measurements were carried out using the potentiodynamic polarization technique and electrochemical impedance spectroscopy (EIS). The results showed an increase in the corrosion rate with the increases in temperature as well with increase in the concentration of the corrosion medium. The results obtained from the Tafel extrapolation technique and electrochemical impedance spectroscopy were in good agreement. Activation parameters were evaluated using the Arrhenius equation and transition state equation. The surface morphology of the corroded specimen was compared with that of the un-corroded sample by using scanning electron microscopy (SEM).
机译:研究了78%Ni M250级马氏体时效钢在不同温度(30°-60°C)下在不同浓度(0.1-2 M)的硫酸介质中在焊接时效条件下的腐蚀行为。电化学测量使用电位动力学极化技术和电化学阻抗谱(EIS)进行。结果表明,腐蚀速率随温度的升高而增加,随腐蚀介质浓度的增加而增加。 Tafel外推技术和电化学阻抗谱的结果吻合良好。使用Arrhenius方程和过渡状态方程评估激活参数。通过扫描电子显微镜(SEM)比较腐蚀样品的表面形态和未腐蚀样品的表面形态。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号