首页> 外文期刊>Journal of natural gas science and engineering >Gas sorption and flow capabilities of lignite, subbituminous and high-volatile bituminous coals in the Southern Junggar Basin, NW China
【24h】

Gas sorption and flow capabilities of lignite, subbituminous and high-volatile bituminous coals in the Southern Junggar Basin, NW China

机译:西北准Jung尔盆地褐煤,次烟煤和高挥发性烟煤的气体吸附和流动能力

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Coalbed methane (CBM) resources are abundant in the Southern Junggar Basin in NW China, encompassing a total volume of 3.54 x 10(12) m(3). However, the gas sorption and flow capabilities of lignite, subbituminous and high-volatile bituminous coals (LSBC, R-o, m <1.0%) in targeted research remain ambiguous. The pore-fractures characteristics of coals (pore size/volume distribution, pore surface areas, fracture geometry, low-field nuclear magnetic resonance (NMR) porosity, permeability, and fractal dimension) are investigated to elaborate the gas adsorption and transport capabilities based on laboratory measurements, including optical microscopy, scanning electron microscopy (SEM), low temperature (77 K) N-2 adsorption/desorption (LTNA), mercury intrusion porosimetry, low-field NMR and a CH4 isotherm adsorption analysis. The SEM images show that the coal pores are primary inter granular pores, residual plant tissue pores and gas outburst pores. Pores that have varying pore widths (3.7-22.5 nm), pore surface areas (0.05-17.23 m(2)/g) and pore volumes (0.19-18.07 x 10(-3) mL.g(-1)) are divided into five types of seepage pores (pore size >10(2) nm) and four types of adsorption pores (pore size <10(2) nm) based on mercury intrusion porosimetry and LTNA. The coal pores consist of transition pores and macropores with diameter of 10-10(2) nm and > 10(3) nm, followed by pores with diameter of 10(2) -10(3) nm and <10 nm. The fractal investigation shows that coals with Langmuir volumes of 15-23 m(3)/t on a dry ash-free basis are considerably affected by the fractal dimension D-1, with a P/P-o of 0-0.5. Gases in the coal are concentrated on adsorbing at the pore surface in pores with 2-10 nm and 10-50 nm diameters. The coal permeability is closely related to the coal's maceral composition (e.g., the ratio of vitrinite to inertinite, V/I) and existing micro-fractures. V/I has a positive influence on the macropores contents and a negative influence on mesopores contents. The NMR results show that the areas of T-2 (>2.5 ms) distribution (0.71-14.50 x 10(3) ms) and movable fluid porosity (1.47-20.34%) significantly affect the coal permeability (0.001-15.584 mD), exhibiting power function relationships. The T-2 (0.5 -2.5 ms) distribution with slight addition after centrifuging probably owed to the retention water onto internal movable pore surfaces. Therefore, those conclusions can have significant implications for LSBC coalbed methane exploration and development. (C) 2016 Elsevier B.V. All rights reserved.
机译:中国西北部准Jung尔盆地南部的煤层气(CBM)资源丰富,总体积为3.54 x 10(12)m(3)。但是,在有针对性的研究中,褐煤,亚烟煤和高挥发性烟煤(LSBC,R-o,m <1.0%)的气体吸附和流动能力仍然不明确。研究了煤的孔隙破裂特征(孔隙大小/体积分布,孔隙表面积,裂缝几何形状,低场核磁共振孔隙度,渗透率和分形维数),以阐述煤的吸附和输运能力。实验室测量,包括光学显微镜,扫描电子显微镜(SEM),低温(77 K)N-2吸附/脱附(LTNA),压汞法,低场NMR和CH4等温线吸附分析。 SEM图像表明,煤孔为主要的粒间孔,残留的植物组织孔和瓦斯突出孔。将孔宽度(3.7-22.5 nm),孔表面积(0.05-17.23 m(2)/ g)和孔体积(0.19-18.07 x 10(-3)mL.g(-1))变化的孔分开根据压汞法和LTNA分为五种类型的渗漏孔(孔径> 10(2)nm)和四种类型的吸附孔(孔径<10(2)nm)。煤孔由直径为10-10(2)nm和> 10(3)nm的过渡孔和大孔组成,随后是直径为10(2)-10(3)nm和<10 nm的孔。分形研究表明,分形维数D-1显着影响Langmuir体积为15-23 m(3)/ t(基于无灰无烟煤)的煤,P / P-o为0-0.5。煤中的气体在吸附在直径2-10 nm和10-50 nm的孔中的孔表面时集中。煤的渗透性与煤的宏观组成(例如,镜质体与惰质体的比率V / I)和现有的微裂缝密切相关。 V / I对大孔含量具有正影响,而对中孔含量具有负影响。 NMR结果表明T-2(> 2.5 ms)分布区域(0.71-14.50 x 10(3)ms)和活动流体孔隙率(1.47-20.34%)显着影响煤的渗透率(0.001-15.584 mD),展示幂函数关系。离心后略微添加的T-2(0.5 -2.5 ms)分布可能是由于保留水在内部可移动孔表面上所致。因此,这些结论可能对LSBC煤层气的勘探和开发具有重要意义。 (C)2016 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号