首页> 外文期刊>Journal of Infrared, Millimeter and Terahertz Waves >Design and Simulation of a Ka-Band TE11 Mode Gyro-Traveling-Wave Amplifier
【24h】

Design and Simulation of a Ka-Band TE11 Mode Gyro-Traveling-Wave Amplifier

机译:Ka波段TE11模式陀螺行波放大器的设计与仿真

获取原文
获取原文并翻译 | 示例
           

摘要

The design of a Ka-band gyrotron traveling wave amplifier with high power and wide bandwidth is presented in detail. The amplifier operates in the TE11 circular mode at the fundamental cyclotron harmonic. The distributed loss technique is adopted in the interaction circuit which guarantees the amplifier zero-drive stability. The effects of the parameters such as input power, driver frequency and magnetic field on the performance of the gyro-TWT are discussed. The simulation results show that the gain and the 3dB bandwidth of the designed Ka-band gyro-TWT are about 56.0dB and 1.8 GHz, respectively. The peak output power and the corresponding electronic efficiency are about 100 kW and 23.8% respectively with the voltage 70 kV and the current 6A at the velocity ratio 1.0.
机译:详细介绍了高功率,高带宽的Ka波段回旋行波放大器的设计。该放大器在回旋基波谐波下以TE11圆形模式工作。交互电路采用分布式损耗技术,可确保放大器的零驱动稳定性。讨论了诸如输入功率,驱动器频率和磁场等参数对陀螺仪TWT性能的影响。仿真结果表明,所设计的Ka波段陀螺仪TWT的增益和3dB带宽分别约为56.0dB和1.8 GHz。当速度比为1.0时,电压为70 kV,电流为6A时,峰值输出功率和相应的电子效率分别约为100 kW和23.8%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号