...
首页> 外文期刊>Journal of loss prevention in the process industries >Geometrical characteristics of externally venting flames: Assessment of fire engineering design correlations using medium-scale compartment-facade fire tests
【24h】

Geometrical characteristics of externally venting flames: Assessment of fire engineering design correlations using medium-scale compartment-facade fire tests

机译:外部火焰的几何特征:使用中型隔室-立面耐火试验评估消防工程设计的相关性

获取原文
获取原文并翻译 | 示例

摘要

In a fully developed under-ventilated compartment fire, flames may spill out of external openings (e.g. windows); Externally Venting Flames (EVF) pose a significant risk of fire spreading to adjacent floors or buildings. The main aim of this work is to comparatively assess a range of fire engineering design correlations used to describe the external dimensions of the EVF envelope. The predictive accuracy of each correlation is evaluated through comparison with experimental data obtained in a medium-scale compartment-facade fire facility, using typical fire loads suggested in the Eurocode. A series of fire tests is performed, employing a 1/4 scale model of the ISO 9705 room, equipped with an additional extended facade. An "expendable" fuel source (n-hexane) is utilized to effectively simulate realistic building fire conditions. An extensive sensor network is used to monitor the dynamic behaviour of a broad range of important EVF physical parameters and a dedicated image processing tool is developed to allow estimation of the EVF envelope main dimensions (e.g. height, width, projection). Digital camera imaging is used to determine the main geometrical characteristics of the EVF envelope. Comparison of fire engineering design correlation predictions with experimental data reveals that correlations for the estimation of EVF height err on the safe side in under-ventilated fire conditions; decreasing the fire load results in under-prediction of EVF height and projection. It is shown that EVF projection and width strongly depend on both excess heat release rate and height. In addition, the necessity to derive appropriate criteria for the identification of the EVF projection is demonstrated. The obtained extensive set of experimental data, covering three different fire load levels, can be also used to validate numerical simulation tools or evaluate the accuracy of other available fire design correlations. (C) 2016 Elsevier Ltd. All rights reserved.
机译:在通风良好且通风不足的室内,火焰可能会从外部开口(例如窗户)溢出;外部通风孔火焰(EVF)造成着火蔓延到相邻楼层或建筑物的巨大风险。这项工作的主要目的是比较评估一系列用于描述EVF外壳外部尺寸的消防工程设计相关性。通过与欧洲规范中建议的典型火灾载荷与在中等规模的隔室-立面消防设施中获得的实验数据进行比较,评估了每个相关性的预测准确性。使用ISO 9705房间的1/4比例模型进行了一系列的防火测试,并配备了额外的扩展外墙。利用“消耗性”燃料源(正己烷)有效模拟现实的建筑物火灾情况。广泛的传感器网络用于监视各种重要EVF物理参数的动态行为,并且开发了专用的图像处理工具以允许估计EVF包络线的主要尺寸(例如,高度,宽度,投影)。数码相机成像用于确定EVF封套的主要几何特征。消防工程设计相关性预测与实验数据的比较表明,在通风不足的火灾条件下,安全侧的EVF高度err估计的相关性;降低火力会导致对EVF高度和投影的预测不足。结果表明,EVF的投影和宽度强烈取决于多余的放热速率和高度。此外,还证明了有必要导出用于确定EVF投影的适当标准。获得的广泛的实验数据集涵盖了三个不同的火灾负荷水平,也可以用于验证数值模拟工具或评估其他可用火灾设计相关性的准确性。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号