Modeling of BP Texas City refinery incident

摘要

This paper presents detailed modeling results of the BP Texas City refinery incident. Three different approaches and explosion modeling tools were used to study the event. The results predicted by all three approaches are similar and all approaches identified a hazard potential comparable to what was witnessed on March 23, 2005. This confirms that quantitative risk assessment (QRA) has the ability to model a realistic scenario, and is therefore useful in safety measure design and emergency preparedness decision making to improve overall safety performance. Had QRA been conducted during a management of change (MOC) decision-making process, personnel trailers likely would not have been sited in such close proximity to the process units. The resulting severe consequences would then not have occurred. This work also aims to emphasize the importance of QRA in process safety management. The paper presents the authors' perception of the sequence of events involved in the incident based on the published literature available at the time of writing. It also assesses potential consequences for the perceived sequence of events using a variety of consequence assessment tools. In doing so, the analysis illustrates how this incident could have been prevented in spite of many operational difficulties. The observations and commentary presented in this paper are intended solely for the purpose of process safety enhancement on the basis of the lessons learned. BP has published its own detailed report; the incident is also the subject of a recent investigation by the US Chemical Safety and Hazard Investigation Board, with the CSB's final report being available at http://www.csb.gov/index.cfm?folder = completed_investigations&page = info&INV_ID = 52 (as of April 2007).