...
首页> 外文期刊>Journal of Materials Science >Reinforcement of molten carbonate fuel cell matrixes by adding rod-shaped gamma-LiAlO2 particles
【24h】

Reinforcement of molten carbonate fuel cell matrixes by adding rod-shaped gamma-LiAlO2 particles

机译:通过添加棒状γ-LiAlO2颗粒来增强熔融碳酸盐燃料电池的基质

获取原文
获取原文并翻译 | 示例

摘要

Improvement in strength of gamma -LiAlO2 matrixes for a molten carbonate fuel cell (MCFC) via addition of rod-shaped gamma -LiAlO2 particles has been investigated. The rod-shaped gamma -LiAlO2 particles with the aspect ratio of 9-15 were obtained by heat-treating rod-shaped beta -LiAlO2 particles at 800 degreesC for 3 h, synthesized from the reaction mixture of LiOH-gamma -Al2O3-NaOH. The gamma -form was very stable for more than 700 h in a molten carbonate environment at 650 degreesC, while the beta -form showed both a phase change from beta- to gamma -LiAlO2 and a morphology change from rod- to bipyramid-shapes. The average pore size and the porosity of the matrix (550 mum thickness) fabricated by tape-casting of the slurry with weight ratio 1.0 of rod-shaped gamma -LiAlO2 particles to commercial gamma -LiAlO2 powders (2.0 mum dia.) were about 0.12 mum and 54%, respectively, after being heat-treated at 650 degreesC for 2 h. The strength (197 g(f)/mm(2)) of the rod- shaped particle reinforced matrixes was enhanced more than twice as much as that of the non-reinforced gamma -LiAlO2 matrixes (91 g(f)/mm(2)). (C) 2001 Kluwer Academic Publishers. [References: 14]
机译:研究了通过添加棒状γ-LiAlO2颗粒来提高熔融碳酸盐燃料电池(MCFC)的γ-LiAlO2基体的强度。通过从LiOH-γ-Al2O3-NaOH的反应混合物合成的棒状β-LiAlO2颗粒在800℃下热处理3小时,获得纵横比为9-15的棒状γ-LiAlO2颗粒。 γ型在650摄氏度的熔融碳酸盐环境中稳定了700多个小时,而β型既显示了从β型到γ-LiAlO2的相变,又显示了从棒状到双金字塔形的形态变化。通过将杆状γ-LiAlO2颗粒与市售γ-LiAlO2粉末(直径为2.0μm)的重量比为1.0的浆料流延成型而制成的基体的平均孔径和孔隙率(550μm厚度)约为0.12。于650℃下热处理2小时后,分别达到了妈妈和54%的水平。棒状颗粒增强基体的强度(197 g(f)/ mm(2))比非增强γ-LiAlO2基体(91 g(f)/ mm(2)增强两倍以上))。 (C)2001 Kluwer学术出版社。 [参考:14]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号