首页> 外文期刊>Journal of Materials Science >Calculated influences of starting materials composition on carbothermal nitridation synthesis of silicon nitride/silicon carbide composite powders
【24h】

Calculated influences of starting materials composition on carbothermal nitridation synthesis of silicon nitride/silicon carbide composite powders

机译:原料成分对氮化硅/碳化硅复合粉末碳热氮化合成的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Equilibrium phase composition at 1 atm total pressure is quantitatively calculated as the function of starting materials composition for carbothermal nitridation synthesis of Si3N4/SiC composite powders. N-2 flow is simulated by the N-2 amount in the starting materials. At low starting N-2 content (molar ratio N-2/SiO2 less than or equal to 100), Si3N4 and SiC can not exist in equilibrium at the same temperature. At higher starting N-2 content, the Si3N4-SiC coexisting temperature range appears above 1760 K. The upper limit of the temperature range becomes higher with increasing starting N-2 content. Starting carbon content affects the composition in the equilibrium powder products. The calculation results are compared with experiments. (C) 2001 Kluwer Academic Publishers. [References: 24]
机译:定量计算在1个大气压下的平衡相组成,作为用于Si3N4 / SiC复合粉末碳热氮化合成的原料组成的函数。通过原料中的N-2量模拟N-2流量。在低的起始N-2含量(摩尔比N-2 / SiO2小于或等于100)下,Si3N4和SiC在相同温度下不能平衡存在。在起始N-2含量较高时,Si3N4-SiC共存温度范围出现在1760 K以上。随着起始N-2含量的增加,温度范围的上限变得更高。起始碳含量影响平衡粉末产品中的组成。将计算结果与实验进行比较。 (C)2001 Kluwer学术出版社。 [参考:24]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号