首页> 外文期刊>Journal of industrial and engineering chemistry >Extraction of Ni(II) from spent Cr-Ni electroplating bath solutions using LIX 63 and 2BDA as carriers by emulsion liquid membrane technique
【24h】

Extraction of Ni(II) from spent Cr-Ni electroplating bath solutions using LIX 63 and 2BDA as carriers by emulsion liquid membrane technique

机译:以LIX 63和2BDA为载体,通过乳化液膜技术从废Cr-Ni电镀液中提取Ni(II)

获取原文
获取原文并翻译 | 示例
           

摘要

In the present study, the synergistic extraction of Ni(II) from spent Cr-Ni electroplating bath solutions (SEBS) was determined using 5,8-diethyl-7-hydroxydodecan-6-one oxime(LIX 63) and 2-bromodecanoic acid(2BDA) by emulsion liquid membranes(ELM)s. The effect of membrane and aqueous phase properties on Ni(II) transport was experimentally investigated. Ni(II) extraction was obtained to be higher than 98.5% in the optimum conditions within 6 min. The higher separation factor (beta Ni/Cr) was obtained as 677. In addition, Ni(II) extraction kinetics depends on LIX63 because the extraction kinetics of LIX63 is slower than 2BDA. Therefore, we have determined that 2BDA acts as a synergist in present extraction system. (C) 2014 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
机译:在本研究中,确定了使用5,8-二乙基-7-羟基十二碳六烯一肟(LIX 63)和2-溴Modecanoic酸从废Cr-Ni电镀液(SEBS)中协同萃取Ni(II)的方法。 (2BDA)通过乳化液膜(ELM)制成。实验研究了膜和水相性质对Ni(II)传输的影响。在最佳条件下,在6分钟内获得的Ni(II)萃取率高于98.5%。获得了更高的分离系数(βNi / Cr),为677。此外,Ni(II)的萃取动力学取决于LIX63,因为LIX63的萃取动力学比2BDA慢。因此,我们已经确定2BDA在目前的提取系统中起协同作用。 (C)2014大韩工业化学工程学会。由Elsevier B.V.发布。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号